iphone 12/12 pro case hexagonal drip #1

iPhone 12 and 12 pro case with a hexagonal tile pattern. This case protects the screen as well as the camera lenses in the back!!

Fits securely and with a satisfying snap!

The apple logo looks sick peaking out through the design.

Let me know how you like it!

If you want to test the fit of the case, don't like the design or just want a simple case check out the free base design of this case!:

simple case (no design on back)

Or check this other one!

Hexagonal grid

Print Settings

Layer Height: Any! i.e. 0.12 - 0.28. If you go with 0.28 there will only be one infill layer, keep the infill low for ease of flexibility when installing and uninstalling. if you go with a smaller layer height just make sure to follow my guidance in the infill section below.

Infill: no more than 15%. I went with 10%. If you add too much infill it might be harder to bend while installing and uninstalling it on the phone.

Infill Pattern: this should not matter but again, for ease of installation I would go with something like concentric, lines, or zig-zag. * I went concentric*

Support: None. no supports needed if printed on its back.

I printed this using Poloymakers Polylite PLA and a few Amolen PLAs to test fit and feel, PLA should be more than good enough though I would suggest printing with a more durable filament like PETG or even HTPLA once annealed if you want added durability.