Equal Space Divider

A friend of mine needed a contraption in order to draw stuff with an equal spacing between them, so I designed him this. It goes from a minimum of 24mm to a maximum of 86mm fully opened. In the photo I printed it with 6 opening points, but I designed it in order to be infinitely printed! You can add pieces and make it bigger, but the measure will always be precise!
To print it you will need to print:
For the external part:
- 2x BackPieceShort,
- 2x TopPieceShort,
and
- 1x MidPieceSlider
Now you already have a working print, but yeah it's useless with just one slider.
You'll need to print, in order to add one more slider:
1x MidPieceSlider,
1x BackPieceLong,
1x TopPieceLong.
Now you have a working print with 2 sliders. And now you just need to print other 3 of these to have 3 sliders, 4 sliders, and so on...
To secure it, you have to print the Pins, just count how many holes you have and print them! I designed them to have a tight fit, and mine haven't came off since when I put them on, but it you find your a bit loose, just use a drop of superglue in it!
The prints doesn't need any support, just lay them down on your print bed and you will be fine!

Let me know if you like it, if you print one yourself (maybe upload a photo, I'll really appreciate it!), and also consider checking the other stuff I make on my profile. I'm still learning how to model things, but I have lots of ideas and I'll upload them soon!

If you also want to make a tip to me, I will really appreciate it, and
I'll think about continue making this stuffs 'cause I will know that
someone likes my design!