Litho Johnny Hallyday guitar

"Give me darkness, then give me light" this phrase from this singer/rock musician makes sense with this object.

Lithophanie / lamp / Johnny Hallyday night light in the shape of a guitar with its ideal base for decoration or as a fan gift.

THE DIMENSIONS:

the guitar is about 200x90x55

the base with inlaid writing is approx. 115x98x35

DESIGN:

the Johnny + guitar part is to be printed in Litho mode.

the base with first name in relief is to be printed normally.

The whole thing is to be stuck together.

Little extra: put a stroke of black felt pen to bring out the lettering.

LIGHTING / LIGHT :

For this creation, I made a base big enough to put different types of lighting.

For my part, I use led spotlights for pscine with remote control that you can find on sites like Amazon, Ali, ...

Good print to you!

Heart on you and all your descendants! =)

"Give me the dark, then the light" this phrase of this singer / rocker takes on its full meaning with this object.

Lithophanie / lamp / night light Johnny Hallyday in the shape of a guitar with its ideal base as a decoration or as a gift for a fan.

THE DIMENSIONS:

the guitar is about 200x90x55

the base with inlaid writing is approximately 115x98x35

DESIGN:

the Johnny + guitar part is to be printed in Litho mode.

the base with the first name in relief is to be printed normally.

The whole is to be glued together.

LIGHTING / LIGHT:

for this creation, I made a base large enough to be able to put different types of lighting.

For my part, I use led spotlights for pscine with remote control that you can find on sites like Amazon, Ali, ...

Good print to you!

Heart on you and all your descendants! =)

Under Cura (for my part) with Geeetech A20M

FOR THE LITHO:

Layer height: 0.12

Initial layer height: 0.2

Line width 0.4

Initial layer line width: 100%.

Number of wall lines: 999

thickness above/below : 0,6

Top layers: 0

Lower layers: 0

Filling density: 0%.

Distance between spacers: 0mm

°C : 205

bed : 55

Printing speed: 35mm/s

speed external wall: 30

inner wall velocity 30

displacement: 80

initial layer 35

skirt / border : 35

Adhesion: edge

width: 10 mm

lines: 25