Dollhouse: bottles and bottles carriers set

This time I've created a few types of bottles and bottle carriers for my niece's dollhouse. It will fit also the shop, kitchen, or bar diorama. Set contains six types of bottles, three types of bottle carriers, and a single SVG file with bottle labels that can be printed and stick on the bottles. The details are visible in the attached pictures.

Bottle types:
- beer bottle - 6x22 mn
- small wine bottle - 8x30 mm
- big wine bottle - 10x34 mm
- big PET bottle A - 10x30 mm
- big PET bottle B - 10x30 mm
- small PET bottle B - 8x27 mm
(the first number is representing the diameter of the bottle and the second - its height)

Carrier types:
- low carrier L:36mm, W:25mm, H:21mm
- high carrier with solid sides L:36, W:25mm, H:29mm
- high carrier with holes in the sides L:36, W:25mm, H:29mm

Label types:
- soda
- beer
- wine
- vinegar
- oil olive

The table visible in the pictures is available here: https://cults3d.com/en/3d-model/various/dollhouse-extendable-table
The tableware and pot visible in the pictures are available here: https://cults3d.com/en/3d-model/various/dollhouse-tableware-pots-and-a-pan

I'm using the following settings:
- material: transparent PETG or PLA
- layer: 0.2
- infill: 20%
- support: tree type support - for carriers only

Bottles are quite small so the quality of the prints, especially the bottlenecks, on FDM printers can be problematic. It is possible to improve it by testing different filaments. In my case, the best quality (with the same setting) occurred for wooden PLA filament.