AC DC Litho guitar

Lithophanie / lamp / night light of the legendary hard rock band AC DC in the shape of a guitar with its base, ideal as decoration or as a fan gift.

DESIGN:

the ACDC + guitar part is to be printed in Litho mode.

the base with first name in relief is to be printed normally.

The whole thing is to be stuck together.

LIGHTING / LIGHT :

For this creation, I made a base big enough to put different types of lighting.

For my part, I use led spotlights for pscine with remote control that you can find on sites like Amazon, Ali, ...

Good print to you!

Heart on you and all your descendants! =)

Lithophane / lamp / nightlight from the legendary hard rock band AC DC in the shape of a guitar with its base, ideal as a decoration or as a gift for a fan.

DESIGN:

the ACDC + guitar part is to be printed in Litho mode.

the base with the first name in relief is to be printed normally.

The whole is to be glued together.

LIGHTING / LIGHT:

for this creation, I made a base large enough to be able to put different types of lighting.

For my part, I use led spots for pscine with remote control that you can find on sites like Amazon, Ali, ...

Good print to you!

Heart on you and all your descendants! =)

Under Cura (for my part) with Geeetech A20M

FOR THE LITHO:

Layer height: 0.12

Initial layer height: 0.2

Line width 0.4

Initial layer line width: 100%.

Number of wall lines: 999

thickness above/below : 0,6

Top layers: 0

Lower layers: 0

Filling density: 0%.

Distance between spacers: 0mm

°C : 205

bed : 55

Printing speed: 35mm/s

speed external wall: 30

inner wall velocity 30

displacement: 80

initial layer 35

skirt / border : 35

Adhesion: Edge

width: 10 mm

lines: 25