100% printable Screw Clamp

Hand screw clamp fully printable, almost without support.
(Only one piece needs a little bit of support)

The jaws can be open up to 86mm (3,38")

You can print it in PLA but i recommend PETG.

Please use support for printing the "Shortarm Pivot". But only from the buildplate!!

All parts are orientated as they are intended to be printed.

I include a stl with a set of all screws you need.

Parts to print:
2x Longarm
2x Shortarm
1x Handle
1x Jaw Longarm
1x Jaw Shortarm
1x Nut
1x Shortarm Pivot (needs support)
1x Spacer25mm
1x Spacer15mm
1x Screw Set

UPDATE 18-5-18:
modifed the chamfer for the thread of the nut.

UPDATE 25-5-18:

increased the play in the threads on the following parts.

jaw-longarm, jaw-shortarm, nut, shortarm-pivot, spacer15mm, spacer25mm

Hope you like it :)

If you interested in using this commercially, please contact me.

Print Settings

Printer brand:
Prusa

Printer:
i3 MK3

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
25-50%

Notes:

Infill:
Screws 50%
Handle 30%
all other parts 25%

Printed with PETG from DasFilament.de

Please use 3 perimeter.

You can print it in PLA but i recommend PETG.

Please use support for printing the "Shortarm Pivot". But only from the buildplate!!

All parts are orientated as they are intended to be printed.