PSG-1 KIT to G3

This kit was developed by 3D ARMY, allows you to completely transform a airsoft G3 from JingGong into the mythical German sniper model PSG-1.

When you buy this kit you have full access to all files to print in yout 3D printer in a convenient and optimized way. Includes all STL files and the detailed assembly guide, with several images and assembly notes.

It ´s a simple body kit to print and mount on the G3, doesn´t require anny knowledge in the assembly or customization of airsoft guns. It´s a kit for beginner level!

The kit is divided into several components:

1) Barrel
2) Handguard
3) Grip
4) Stock
5) Magazine
6) PSG-1 Sidebar

1) Barrel

The barrel is attached to the gun with the same system as the JingGong G3 fitting including the threaded bolt that holds the metal sights.

List of components:

• 3D Printed Parts
• 1x Aluminium Tube : 19mm Ø x 240mm
• 1x Bolt : M5x20mm
• 1x M5 Nut
• 1x M3 Threaded Stud

2) Handguard

The handguard it´s divided into four parts, two on the right and two on the left. It´s necessary on both sides to glue the two front and rear parts according to the assembly manual. Each side is reinforced with two threaded rods for a solid part.

List of components:

• 3D Printed Parts
• 1x Bolt : M4 x 30mm Conic Head
• 1x M4 Nut
• 3x Bolt : M3 x 15mm Cylindrical Head
• 3x Bolt : M3 x 25mm Cylindrical Head
• 5x M3 Nut
• 4x M4x180mm Threaded Rod

3) Grip

Very ergonomic PSG-1 handle, developed for gearbox V2, the assembly method it´s the same as the original handle of the G3. As in the photos published in this kit, we recommend a custom painting to imitate wood to increase realism.

List of components:

• 3D Printed Parts
• 1x Bolt : M3 x 30mm Cylindrical Head
• 4x Bolt : M3 x 14mm Cylindrical Head
• 1x Bolt : M5 x 70mm Hexagon Head
• 5x M3 Nut
• 1x M5 Nut
• 5x M4x15mm Threaded Rod
• 2x Original G3 Handle Screws

4) Stock

The stock it´s optimized to use any type of battery. The rear cover is removable, and the fixing method is the same as the original stock of the JinGong G3.

List of components:

• 3D Printed Parts
• 2x Bolt : M4 x 20mm Cylindrical Head
• 1x Bolt : M8 x 40mm Hexagon Head
• 1x M8 Nut
• 9x M3x15mm Threaded Rod
• 1x 2mm Ø x 30mm Steel Rod

5) Magazine

Due to the lack of magazines available on the market, we have developed a product optimized for 3D printing, so who buys the file has access to print as many mags as they want.

For the charger spring, we highly recommend the use of springs from PTW magazines for M4, which are sold in packs of 12 unit available at any airsoft store.

100% compatible with all G3 models from Jing Gong!

List of components:

• 3D Printed Parts
• 7x Bolt : M3 x 15mm Cylindrical Head
• 1x Bolt : M3 x 12mm Cylindrical Head
• 1x Bolt : M2.5 x 12 mm Conic Head
• 6x M3 Nut
• 1x PTW M4 Magazine Spring
• 1x 3 mm Ø x 5 mm x 0.5mm Spring

6) PSG-1 Sidebar

In the real PSG-1 these bars serve to reinforce the body of the weapon, in this case it´s merely aesthetic and in order not to damage the body of the G3, the use of double-sided adhesive tape to attach to the weapon, however it can also be glued.

List of components:

• 3D Printed Parts

For the correct assembly of this kit we recommend that the instructions in the assembly manual are carefully followed.

This kit is simple and anyone can do it, here you have an opportunity to have this mythical weapon for the airsoft battlefields of the 21st century!

Join the revolution and march with us!

Follow uns on Instagram
@3d_army_armory

Alert!

3D Army don´t assume any responsibility for the misuse, misconduct or damage that it may cause to itself or others of any of the products that we have available for download developed strictly for the practice of airsoft or paintball.

It´s absolutely forbidden to use any of our files for real weapons!

Layer height: 0,18mm
Wall thickness: 3 mm
Infill: 50% (Minimum)
Speed: 40mm/s