Semicrystal V3 -- 3D Printable Cello
Semicrystal V3 -- 3D Printable Cello
Published 2021-02-15T11:04:09+00:00
The Semicrystal V3 is a printable accoustic/electric cello: https://youtu.be/kYHJZF6FtTQ
Featured in the Art of Polymers concert, check us out! www.artofpolymers.com
Project webpage (currently under construction):
https://atlantisq.wordpress.com/2021/01/24/obj-2602-3d-printed-cello-semicrystal-v3/
210125 update: Printing setting written up.
This cello is designed to be modular and open to modding and experimentation. All parts are attached via nuts and bolts and can be individually replaced with ease. No glue is used.
The body consists of 3 sections with identical interfaces. As shown in the video it has a soundbox and a legrest attached to the middle section. Additional soundboxes and/or preamp housings, carrying handles, folding stands, etc. can be attached to other sections as desired. I look forward to see ideas, especially wrt soundbox design and arrangement.
Hardware required:
20mm x 16mm x 1000mm Carbon Fiber tube x1
16mm x 12mm x 500mm Carbon Fiber tube x1
8mm x 6mm x 500mm Carbon Fiber tube x1
Set of bass guitar tuners (2R2L)
M4 x 45 Pan head machine screw x100 (I used Phillips, but whatever drive should work fine)
M4 x 20 Pan head machine screw x100 (Whatever drive)
M4 x 25 Pan head machine screw x2
M4 x 35 Pan head machine screw x2 (Optional)
M4 nut x 100
M6 x 80 Hex bolts x25 (Socket head with washers should work as well, but pan heads WILL NOT WORK)
M6 x 45 Hex bolt x1
M6 x 65 Hex Bolt x2
M6 nut x 25
1/4 in.-20 x 1 in. Hex bolt x1 (Could be slightly longer, Metric replacement M6 x25)
1/4 in.-20 Wing nut x1 (or M6)
Cello strings, Bow, Rosin
Print Parameters:
All parts will fit on a 190x190 printer bed.
Default 0.4mm nozzle with 0.6mm extrusion width, 0.25mm layer height, 3 perimeters, 30% infill, no supports.
Tuner_housing, Body6, Body5, Body_1, all Body_Sections, Tailpiece and Tailpiece_Base:
4 perimeters and 50% infill
Body1-4: Fingerboard part needs to be printed with 0.08mm layer height, or as low as your extruder can manage.
Soundboxes: 1 perimeter, 30% rectilinear infill.
Body5, Tailpiece and Tail need supports
For assembly see video: https://youtu.be/kYHJZF6FtTQ. Skip to 1:40. Detailed assembly instructions coming up.
The Semicrystal is licensed under a Creative Commons Attribution-NonCommercial Sharealike 4.0 International License which means you are free to share and modify it for non-commercial use.
For commercial licensing inquiries leave a comment here or at atlantisq.wordpress.com
Date published | 15/02/2021 |