YÉVA - LED LAMP WITH NAME (NAMELED)

A modular lamp that can have integrated LED strips. You can choose a control system with a command or even via WI-FI on your mobile phone.
Print all the letters separately, so it fits well on a normal printer, and then paste with plastic glue on the identified inserts in a very simple way.

The letter covers are printed on a clear material, which is translucent and illuminates. Cover parts are not glued, they are just fitted.

Leds must be glued to the inner wall of the letters and pass between them in the existing holes.
The entire printing is prepared with printing clearances, so that there are no problems.

The last letter of the name has 3 versions, to allow different electrical connections. An existing hole on the side, behind or even without a hole to be able to drill wherever you want, or even use the letters only as an ornament, without light.

Size: 14cm hight (5.51 in)

CUSTOMIZING ANOTHER NAME
If you want another personalized name with a Nameled lamp, contact by email to hstudio.pt@gmail.com and indicate the name you want. The name will be quickly created to be able to print.

Summary of Assembly Steps:
1. Print letter bases
2. Print letter covers (white or translucent)
3. Glue a led strip to the inner edge, passing through the channels.
4. Make an electrical connection according to the model you are going to use.
5. Place on the table or hang
6. Enjoy the magic.
---

To help, I leave here the indication of some parts that I use in the project:

- Led strips with control and transformer (complete solution)

- Plastic Glue

Infill - 12%

Height - 0.3mm (nozzle 4mm) or 0,4mm (nozzle 6mm - prefered)

Opaque color for letters, white color for covers.