Skip to content

Motorbike fun design PART 5

IMG_2945.JPG Motorbike fun design PART 5
IMG_2942.JPG Motorbike fun design PART 5
IMG_2933.JPG Motorbike fun design PART 5
IMG_2932.JPG Motorbike fun design PART 5
IMG_2931.JPG Motorbike fun design PART 5
IMG_2936.JPG Motorbike fun design PART 5
IMG_2935.JPG Motorbike fun design PART 5
IMG_2938.JPG Motorbike fun design PART 5
IMG_2944.JPG Motorbike fun design PART 5
a069fb21221d3ed41531f05417c6cff7.png Motorbike fun design PART 5
a968738e807a69fda52f7ca9946f038c.png Motorbike fun design PART 5
e468786ecf9d64c691ad99afaa1d12a4.png Motorbike fun design PART 5
710f6b9c5e0177a0edc71508c54106de.png Motorbike fun design PART 5
7d864f9895f1a9d0aef9c0ad147e0440.png Motorbike fun design PART 5
48fdc9cfa5b37edc020ad548e238520f.png Motorbike fun design PART 5
motorbike_oil_tank.stl Motorbike fun design PART 5
motorbike_oil_tank_cap.stl Motorbike fun design PART 5
motorbike_carbi_cover.stl Motorbike fun design PART 5
motorbike_front_caliper_r.stl Motorbike fun design PART 5
motorbike_rear_brake_calipers.stl Motorbike fun design PART 5
motorbike_front_caliper_L.stl Motorbike fun design PART 5
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.8k views
  • 21 likes
  • 269 downloads
License
3D design format
STL Folder details Close
  • motorbike_carbi_cover.stl
  • motorbike_front_caliper_L.stl
  • motorbike_front_caliper_r.stl
  • motorbike_oil_tank.stl
  • motorbike_oil_tank_cap.stl
  • motorbike_rear_brake_calipers.stl

Learn more about the formats
Publication date 2021-02-19 at 20:09
?
Published to Thingiverse on: 2017-04-14 at 15:18
Design number 300865
Hex17

Hex17

3D printer file info

3D model description

Here are the final parts for the chopper. Oil tank, oil cap, Callipers L & R front and one rear and the Carbi cover.
All parts are printed to 1.5 the size of the stl's. Everything was printed at 15% fill except the oil cap I did a 99%.
The oil tank I needed to trim a bit to make it fit. Just where it contacts the frame.
The Carbi cover I as had to trim some off it to allow it to slot in better.

The front callipers have to be glued on, all that is needed is a drop of super glue. Other than that everything should just slot in.

Hope you enjoy the Chopper. If you have any questions just ask. If you think any of the parts need changing let me know.
All the parts to build the whole bike are over the five sections of Motorbike fun design.

I am making a new part for the back guard at the moment as I dropped the chopper when I was fitting the oil tank, breaking back of the guard. I will try and scab a part on to it rather than printing a whole new rear section. That is why I haven't put a up a picture showing the hole bike. Once I do I will.

please let me know if you make one
thanks again
Pete

EDITTED- Not too happy with the modified back but its done. I think I have spend close to 80+ hours on this. I though it would take some time but not this much.

Thanks enjoy

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.