Skip to content

(OLD) Nintendo OpenRC Mariokart (OLD)

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.4k views
  • 1 like
  • 38 downloads
License
3D design format
STL Folder details Close
  • Axle_shim.stl
  • Bearing_Block_18.15mm.stl
  • Block.stl
  • Body_Front_thin_wall_fix.stl
  • Body_Middle.stl
  • Chasis_Front.stl
  • Front_Axle_v2_x2.stl
  • Front_Body_With_M_Logo.stl
  • Front_Dome.stl
  • Front_Nut.stl
  • Front_Rim.stl
  • Front_Tires_x_2.stl
  • Left_Hub_v2.stl
  • Left_ping.stl
  • Lower_Servo_Saver.stl
  • Lower_Steering_Frame.stl
  • Rear_Axle_flatV2.stl
  • Rear_Bearing.stl
  • Rear_Body.stl
  • Rear_Body_With_M_Logo.stl
  • Rear_Nut_x_2.stl
  • Rear_Tire_x_2.stl
  • Rear_rim_x_2.stl
  • Right_Hub_v2.stl
  • Right_ping.stl
  • Servo_Bracket.stl
  • Spur_Gear_11_teeth.stl
  • Spur_Gear_11_teethv2.stl
  • Spur_Gear_11_teethv2_3.275.stl
  • Spur_Gear_11_teethv2_3.375.stl
  • Spur_Gear_66_teeth.stl
  • Steering_Wheel.stl
  • Upper_Servo_Saver.stl
  • Upper_Steering_Frame.stl
  • front_axle_7.85mm.stl
  • front_axle_7.9mm.stl
  • rear_chassis_V3.stl
  • servo_push_rod.stl

Learn more about the formats
Publication date 2021-02-20 at 13:48
?
Published to Thingiverse on: 2018-04-27 at 02:06
Design number 302897
Metalurgia

Metalurgia

3D printer file info

3D model description

Update: Mayor changes to the Kart's design. The rear axle is super stable now, bigger gears for more torque, Body with M logos are now available, servo saver fix, new servo push rod (user needs to make hole for the servo side), different diameters of axle and bearing blocks available for those who have a lose joint or mate, new rear chassis with stronger motor mount.
Update: The rear axle has problem with some of you. I decided to make a new one.
Update: A thin wall was detected on the front body fender by a Facebook user. There is now an updated front body part called Front body thin wall fixed.

Consider supporting me on Patreon: https://www.patreon.com/Metalurgiasdesigns

If you like this please go to my Facebook page and drop a like :).
https://www.facebook.com/Metalurgiasdesigns/

Fasteners kits available here: https://www.etsy.com/listing/610456453/openrc-mariokart-fastener-kit-rc?ref=shop_home_active_1

For your convenience arrange the files accordingly to the picture above. That will help you get organized and make the process much easier.

Please respect the license under which this project is released. Thank you!

This is my version of the OpenRC car. This is my first mayor project. You can print everything in PLA except the tires which are done in TPU.

The car uses the same bearings as the ones in the F1 by Daniel Noree. I have to give him credit because his design was a big inspiration for me and this project.

You can print most of the parts without support except for:

  1. Rear Body

  2. Front Rim

Things to buy:

  1. Filament duh...

  2. You also need M3 screws and nuts which you can get at your local hardware store or at the link posted above.
    *DIN 934 M3 Nuts (x21)
    *DIN 7991 M3X8 (x15)
    *DIN 7991 M3X10 (x22)
    *DIN 7991 M3X16 (x8)

  3. The car uses the same bearings as the ones in the F1 by Daniel Noree.

  4. You can buy the electronics you prefer, you need:
    *Motor
    *ESC
    *Baterry
    *Charger
    *Radio Control
    *Reciever

I will be releasing a video soon to feature the car and to show the assembly process.

If you like this please go to my Facebook page and drop a like :).
https://www.facebook.com/Metalurgiasdesigns/

Consider sponsoring me via my patreon page. This will help me a lot. :D
https://www.patreon.com/Metalurgiasdesigns

Thank you for your support enjoy.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.