Skip to content

Direct extruder Anycubic Chiron mk8 / mk10

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3.6k views
  • 3 likes
  • 28 downloads
License
3D design format
STL Folder details Close
  • 5015eje.stl
  • chiron_direct_extruder.stl
  • conectores.stl
  • endstop_X_chiron.stl
  • guia_cable.stl
  • soporte_cable.stl
  • soporte_gu%C3%ADa_cables.stl
  • soporte_gu%C3%ADa_cables.stl

Learn more about the formats
Publication date 2021-02-22 at 16:56
?
Published to Thingiverse on: 2019-11-20 at 20:15
Design number 307267
galagor

galagor

3D printer file info

3D model description

Extrusión semi-directa para Anycubic Chiron usando el hotend mk8 /mk10

se utiliza el mismo carro original, pero HAY QUE CORTAR EL VÉRTICE DONDE SE ATORNILLA LA CADENA QUE LLEVA EL MAZO DE CABLES, de forma que la parte superior del carro quede completamente plana, no es necesario perforar ningún agujero en el carro, se usan los originales.

Sigue manteniendo el sensor de cama y se pueden utilizar los sopladores independientes ya publicados:
https://www.thingiverse.com/thing:3544699
https://www.thingiverse.com/thing:3621886

Se incluye, pero puedes usar el sistema que prefieras, un pequeño soporte que hace de guía para el mazo de cables que van al hotend.

Necesitarás algunos tornillos diferentes a los originales.

Se pierden unos 3-4 cm de altura.

MUY IMPORTANTE, PARA ASEGURAR LA RIGIDEZ DE TODO EL CONJUNTO, ES NECESARIO CAMBIAR EL TORNILLO DE LA RUEDA INFERIOR DEL CARRO (LA QUE LLEVA LA EXCÉNTRICA) POR UNO A MEDIDA (SERÁ NECESARIO CORTARLO), DE MANERA QUE HAGA CONTACTO CON EL DISIPADOR DE ALUMINIO POR LA PARTE DE ATRÁS. DE ESA FORMA SE EVITA POR COMPLETO CUALQUIER FLEXIÓN DE TODO EL SISTEMA.

Actualmente, usando nozzle 0,6 tengo las retracciones entre 1,6 y 1,8 mm a 50 mm/s

Semi-direct extrusion for Anycubic Chiron using the hotend mk8 / mk10

the same original X carriage is used, but the VICE IS TO BE CUTTED WHERE THE CHAIN ​​WHICH CARRIES THE CABLE HARNESS IS SCREWED, so that the top of the carriage is completely flat, it is not necessary to drill any holes in the carriage, the holes are used originals

Continue to maintain the bed sensor and you can use the independent blowers already published:
https://www.thingiverse.com/thing:3544699
https://www.thingiverse.com/thing:3621886

It is included, but you can use the system you prefer, a small support that acts as a guide for the wiring harness that goes to the hotend.

You will need some different screws than the original ones.

They lose about 3-4 cm in height.

VERY IMPORTANT, TO ENSURE THE RIGIDITY OF THE WHOLE ASSEMBLY, IT IS NECESSARY TO CHANGE THE SCREW OF THE BOTTOM WHEEL OF THE CARRIAGE (WHICH TAKES THE EXCENDER) BY ONE TO MEASURE (IT WILL BE NECESSARY TO CUT IT), IN A WAY TO CONTACT THE ALUMINUM DISSIPER FROM BEHIND. IN THAT WAY IT IS AVOIDED COMPLETELY ANY FLEXION OF THE WHOLE SYSTEM.

Currently, using nozzle 0.6 I have retractions between 1.6 and 1.8 mm at 50 mm / s

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.