T300 GTE Blackout Mod (Thrustmaster buttons/logo)

##I've spent countless hours measuring and printing these to ensure that they fit properly, print (relatively) easily and look great. I have released them for free but do feel free to make a donation if you like the end product :)

What this is:

• Buttons and center logo replacement for the Thrustmaster T300 Ferrari GTE sim racing wheel.
  • Both are quick prints, ~10-15mins
• May work for other wheels too, do try and report back if you do :)

What to print:

• For the buttons: Each button is made up of 1 pin ("Button Pin_T300GTE.stl") and 1 button ("Buttton_T300GTE.stl") The pin is inserted into the bottom of the button, with the hex head going into the bottom hole of the button
• For the center logo: 2 versions are provided:
  1. McLaren logo ("LogoMcLaren_T300GTE.stl")
  2. Blank logo for customization ("LogoBlank_T300GTE.stl")

Installation:

For both the buttons and the logo, you will have to take apart the wheel itself. This is a simple process and the whole thing should take less than 10 minutes.
- Buttons: Reuse the rubber part found under each of the original steering wheels
- Logo: Pop out the original Ferrari logo by releasing the clips and snap in the new one. Be careful as the clips may be fragile

The front button plate can be found here. I am indeed charging a fee for it, as this took weeks to perfect.

Do share your makes!

-