"Chain Link" Wall Clock

Wall Clock "Chain Link": A small craft project

First of all you'll need a High Torque Movement Mechanism Clockwork if you want to craft this wall clock.
I bought this one from amazon: https://www.amazon.de/gp/product/B076ZRH5KL

Description of the files:

1. "Chain Clock Chassis": This is the chassis for the clockwork.
   The high torque clockwork with 30.5 x 13 x 2 centimetres dimensions will fit inside.
   I have printed mine in red with resolution 0.28 and infill 15%. Use support for this part.

2. "Chain Clock Chassis Cover Plate": Just a cover plate for the chassis
   to have a color contrast to the chassis and to the numbers.
   I have printed mine in black with resolution 0.28. No infill, no support.

3. "Pinion 12 Teeth": This is the chain drive.
   Connect the pinion as minute hand to the clock work.
   I have printed mine in silver with resoluton 0.2 and infill 15%. No support.

4. The chain links are made up of 3 files
   "Chain Pin Link", "Chain Link Cover" and "Chain Inner Link"
   You will need 72(!) of each.

   I provide 2 comfort print sheets for this, so you can print 12 or 24 links at once.
   Think about whether you want the chain to be multicolored.

   I have experimented a lot with printable chain links.
   There are many chain projects on thingiverse.
   But none had the smoothness that I wanted.
   So I created this one. It runs smooth, but you have to seal the links with an iron.

   Printer settings for the chain links parts: resolution 0.2 with infill 80%. No support.

5. The Number Files:
   There's an STL for every number of the clock.
   I also provide a comfort print sheet with all numbers.

   Just click them on the finished chain.

   I have printed mine in orange with resolution 0.28. Infill doesn't matter. No support.

Challenge accepted? Please upload your make!

-