PC6 Pilatus Turbo Porter Frame

WARNIG: this plane is not pure 3d printed plane needs getting your hands dirty and cut foam.

This proyect born as a attempt to create a rc plane with a good performance, predictable and gentle characteristics, resistant, easy to mantain- repair, like the real counterpart the noble Pilatus Turbo Porter.
This airplane combine the foam characteristics (light, acceptable resistance, fast and easy to cut big pieces) with 3d printed qualities in critical pieces (precision, replicability and complex geometry).
The result is a easy to build airplane, lightweight but big to survive in strong winds.

AILERONS and FLAP:
https://www.thingiverse.com/thing:3685812

more info on RCGROUPS

https://www.rcgroups.com/forums/showthread.php?3142389-new-PC6-turbo-porter-1-5m-%283d-printed-mix%29

video:
https://www.youtube.com/watch?v=ly61lw3X5Oc

content

TP 2019 ESC.stl escape
TP 2019 HingeD.stl Door Hinge
TP 2019 HingeF.stl Fusselage Hinge
TP 2019 HoodA.stl Motor hood front (removable)
TP 2019 HoodB.stl motor hood back (fixed)
TP 2019 LAT1.stl Cage Lateral 1
TP 2019 LAT2.stl Cage Lateral 2
TP 2019 LAT3.stl Cage Lateral 3
TP 2019 LAT3b.stl Cage Lateral 3(alternative, it needs less supports)
TP 2019 LG BASE A.stl Landing Gear Base A (Belly front)
TP 2019 LG BASE A1+B1.stl Landing Gear Base separators(fusselage)
TP 2019 LG BASE B.stl Landing Gear Base B (Belly backward)
TP 2019 LG KNEE.stl Landing gear Knee
TP 2019 LG SH.stl Landing gear Shoulder
TP 2019 MotorM.stl Motor Mount Nose ("firewall" included)
TP 2019 NLAT.stl Nose frame lateral
TP 2019 NRIB1.stl Nose lower Front Rib
TP 2019 NRIB2.stl Nose Upper Front Rib
TP 2019 NRIB3.stl Nose lower back Rib
TP 2019 RIB1.stl Cage front rib
TP 2019 RIB2.stl Cage suspention
TP 2019 RIB3.stl Cage front Wing rib
TP 2019 RIB4.stl Cage insert tube wing -front wing lock
TP 2019 RIB5.stl Cage rib5 backward wing lock
TP 2019 RIB6.stl Cage rear Rib
TP 2019 RIB7.stl Cage rib -servo suport
TP 2019 TAIL1.stl Rudder insertion piece
TP 2019 TAIL2.stl Horizontal stab union
TP 2019 WING Join.stl Wing joint plug
TP 2019 WTENSOR1.stl tensor wing fixation
TP 2019 WTENSOR2.stl tensor fusselage fixation
TP2019 BASE.stl Cage base
TP2019 WINGRIBS.stl Wing ribs
TP2019 windshield.stl WINDSHIELD ADDED
TP 2019 MotorM1.stl NEW MOTOR MOUNT WITH SUPPORT

UPDATE jun 21, 2019:
I added a new motor mount with supports that could be easy to print (I didn´t printed yet). the corresponding factory file is available for simplify3d users. Basic steps are , put the object with the front over the heat bed, and explode the object in 7 support and the final piece. Print the motor mount eith 2 perimeter, 3 layers top and bottom and 100% infill, print the 7 suport part at 1perimeter and 1 or 2 layers at bottom, 0 top layers with 0% infil in the first section (until 27mm heght) and change to 10-15% infill over this layer. Separation between supports and objects are 0,3mm). I recommend 0.2mm height.

I really appreciate that someone test this piece to

-