Skip to content

Mercenary Kit for 3dSets Landy - Bumper Kit

BumperKit-Banner.jpg Mercenary Kit for 3dSets Landy - Bumper Kit
Full-Kit4.jpg Mercenary Kit for 3dSets Landy - Bumper Kit
BumperKitCloseUp1.jpg Mercenary Kit for 3dSets Landy - Bumper Kit
BumperKitCloseUp2.jpg Mercenary Kit for 3dSets Landy - Bumper Kit
BumperKitCloseUp4.jpg Mercenary Kit for 3dSets Landy - Bumper Kit
BumperKitCloseUp5.jpg Mercenary Kit for 3dSets Landy - Bumper Kit
Full-Kit-CloseUp2.jpg Mercenary Kit for 3dSets Landy - Bumper Kit
MWRD_Landy_Bumper_Details.stl Mercenary Kit for 3dSets Landy - Bumper Kit
MWRD_Landy_Bumper_Main.stl Mercenary Kit for 3dSets Landy - Bumper Kit
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 6.7k views
  • 19 likes
  • 38 downloads
  • 1 comment
  • 1 make
License
3D design format
STL Folder details Close
  • MWRD_Landy_Bumper_Details.stl
  • MWRD_Landy_Bumper_Main.stl

Learn more about the formats
Last update 2021-03-09 at 16:30
Publication date 2021-02-26 at 21:10
Design number 315908
MWR_Designs

MWR_Designs

3D printer file info

3D model description

The Mercenary bumper kit is an addon for 3dSets Landy 3,4 and 5. It features a winch housing (untested), 4x 5mm light sockets, some oversized hooks, a servo/engine cover and an angled bash bar! It prints without supports and is super strong. Its styling is a mix of off roader, military and Kahn designs to give a unique and aggressive bumper to really finish the look of your truck!

3D printing settings

Print at 20% infill and 100% for the details.
There are no supports needed for anything in this kit. All STLs come preoriented and grouped for easy printing.

-Assembly is really Easy. You can use the default Bumper mount or use the MWR extended one to help tire rubbing on larger wheel setups.
-The end caps are held in with 6mm M2 screws
-Hooks are mounted using 10 or 12 mm M2 Screws
-Front winch plate uses 4x 6mm M2 screws
-To fix the bash bar use 4x 16mm M2 screws from below
-Finally 4x 10mm M2 screws to mount the Servo Cover (if servo arm hits this part use bumper extender to push the bumper forward)
-The 1x4 plate detail is glued into the slot in the servo cover
-The light sockets are glued as well. To add lights, drill holes for LED wires in the bumper body, feed LEDs through and then glue the light sockets into place. the thinner ones go on the outside light.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.