HK G3 JG MAGAZINE - PMAG | MID-CAP mod.2

3D ARMY present a mid-cap magazine exclusively for airsoft guns only!

Works only in HK G3 Jingong model (compatible with Tokio Marui probably). Have room for 110 bb's, they are fed into the gun without any problems.

This product consists of the following parts list:

3D Printed Parts
11x Bolt M3 x 15mm
10x Nut M3
1x Bolt M2,5 x 12mm | Conic Head
1x Spring 2mm Ø x 6mm length
2x PTW M4 magazine springs
This mid-cap works very well, we recommend sanding the different parts slightly for better operation, depending on the settings of each printer.

The assembly of the magazine is simple, just follow the assembly guide that comes with the STL files. The placement of the springs is done laterally, after the mag core is all screwed.

In the available files, there is an image with the fake ammunition cartridges that can be printed and pasted inside the magazine.

Join the revolution and march with us!

Follow uns on Instagram
@3d_army_armory

Alert!

3D Army don´t assume any responsibility for the misuse, misconduct or damage that it may cause to itself or others of any of the products that we have available for download developed strictly for the practice of airsoft or paintball.

It´s absolutely forbidden to use any of our files for real weapons!

Layer height: 0,15mm
Wall thickness: 3 mm
Infill: 50% (Minimum)
Speed: 40mm/s