Wardrobe Anywhere - shelf hook

So you just ironed your shirt but have nowhere to hang it?

Maybe you were expecting guests but your wardrobe wasn't?

This is where Wardrobe Anywhere comes in handy.

For your convenience, the main part comes in multiple sizes - please print the one corresponding to the thickness of the shelves you want to use it with.

Managed to put over 5kg of wihter jackets without braking the part so it's strong enough for everyday use.
Make sure your shelf can take the additional load - some wardrobes and shelves are hollow and may get damaged under non-standard loads.

Main part - recommendations:
* number of parts: 1 (choose according to shelf thickness)
* orientation: print on the side
* adhesion: skirt (no brim, no raft)
* support structure: no
* material: PETG gives great resuts, didn't try others
* wall thickness 0.8-1.2mm - more will provide more durability
* infill: 5-20%

Bumper recommendations:
* number of parts: 2 bumpers needed for 1 hook
* orientaton: bumper's working surface touching the buildplate
* adhesion: brim
* material: good results with TPU or PP
* infill: depending on how much load you want to put on it, 0-15% infill should do
* speed and others: with flexible materials like you may need to slow the print down or otherwise tweak the parameters. If nothing else works, PETG or other hard material will work, only it may tend to slip off the shelf or scratch or otherwise cause damage to the shelf.