Gloomhaven Insert and Organizer

This download includes two different inserts. The recommended one is the Tuck-Box Based Insert.

These inserts are designed to hold both Gloomhaven and Forgotten Circles, and designed to fit in the box with minimal box lift. Key differences:
- The tuck box based insert supports sleeving all cards.
- The tray-based insert supports sleeving some cards.
- The tuck box insert requires printing at least eight replacement hero envelopes to minimize box lift.

Some models are only needed for a particular version:

Included zip files: All files in the top directory are needed for both inserts. All of the materials for the tuck box and tray based inserts are saved into separate zip file directories.

"- Base" models: print these if you only have and intend to own the base game

"- FC" models: print these if you have Gloomhaven and its expansion, Forgotten Circles, and you wish to store them together in the Gloomhaven box

"OPTIONAL" models: one is a copy of the Hero envelope without supports. The envelopes are narrow and I worry about it falling over while printing, but your printer may be different. The other is a piece that you can print if you do not intend to 3D print the hero envelopes, in which case you will have additional space that this spacer will fill and provide additional storage that can be used for items that would be stored loose above the 3D printed envelopes, or provide additional space for sleeved cards.

Printed in PLA on an Ender 3, with 20% infill where applicable.

Recommendation:
Don't do what I did and use whatever colours were at hand. Colour code the trays by the layer of the box that they will sit on, and cleanup will be much easier. If you print hero envelopes, you may want to print red lids for characters that haven't been unlocked yet.