Gecko mask support

This holder, hanger or coat hanger can be used for many things, for example to hang your face masks or leave your keys when you come in from the street.

It is modularly designed so that everyone can adapt it to their own needs. You can attach the individual geckos directly to the wall using a dowel and screw, or glued to a brick base.

**Brick bases

• 20 cm in one piece (Wall_20 cm.stl)

• 40 cm in one piece (Muro_40 cm-entero.stl)

• 40 cm in 2 pieces of 20 cm and one more piece with inserts (Wall_40cm_cut-right.stl, Wall_40cm_cut-left.stl, Wall_40cm_cut-straight-inserts.stl)

Geckos

• Gecko facing right to put on the wall with screw (Gecko_right_hanging.stl)

• Gecko facing left to put on the wall with screw (Gecko_left_hanging.stl)

• Gecko facing right to be glued on the base (Gecko_right_glue.stl)

• Gecko facing left to paste on the base (Gecko_left_to_paste.stl)

Printing instructions **Printing instructions

• Orientation

Brick bases will be printed vertically on the bed as they are oriented. The 20cm pieces, may need to be rotated 45 degrees to lie diagonally across the bed to fit a 200x200 bed.

The Geckos are printed with all four legs resting on the bed.

• Adhesion to the bed: 10-line border.

• Support: Yes

• Filling: Bases (15%) and Gecko (90-95%)

• Perimeters: Bases (3) and Gecko (5)

• Material: All parts can be printed in PLA.

**Assembly Instructions

If we have printed the 40 cm base formed by three pieces, we will glue them together with a two-component epoxy resin glue such as araldite or even cyanoacrylate.

Both the bases and the geckos can be painted with acrylic paints, either with a brush or an airbrush. If you need to disguise any assembly joints, you can use a putty paste before painting.

The geckos on the brick base can be glued with two-component epoxy resin. You can combine right-facing geckos with left-facing ones and play with the arrangement, heights and angles.

The brick bases will be fixed to the wall with two 4 mm dowels and two 2.5 x 20 mm screws. The geckos that go directly to the wall will need a 4 mm dowel and a 2.5 x 20 mm screw.

-