Dwarf Panzer Bike

Intended for 3D print.

Rune- encrusted bikers in space.
This kit contains model parts to create a great number of different armored bikes, trikes and quads for military use. Please see the Detailed List below for a more comprehensive description.
The Dwarf Panzer Bike is intended for print in 28mm scale, and the default size of all model parts are matched to this scale.
The kit contains 24 model parts, all packaged in separate .stl files. The files are in turn packaged in a .rar archive. This includes several variants of the same model parts, and parts that are entirely optional. You will NOT have to print every part to make one full miniature. :)
Please note that the kit is compatible with the Panzer Buggy, also available from Sharedog Miniatures. There are several guns and other addons for the Panzer Buggy available from Sharedog Miniatures (sold separately). Some of these addons can also be used with the Dwarf Panzer Bike. A list of links to addons that can be used with the Dwarf Panzer Bike (as of 20210309) are included at the bottom of this page, under Compatible Products.

DETAILED LIST

• Bike Frame, no saddle, no sidegunner pod (sidegunner pods are small armored compartments with a detatchable hatch on top. Hatch can be replaced by other alternatives like guns or armed riders. Please note that this kit only includes a hatch. Other sidegunner alternatives are sold separately).

• Bike Frame, no saddle 1 sidegunner pod.

• Bike Frame, no saddle, 2 sidgunner pods

• Bike Frame, saddle over large tire, no sidegunner pod (the kit also includes a rider that can be sat on the saddle).

• Bike Frame, saddle over large tire, 1 sidegunner pod

• Bike Frame, saddle over large tire, 2 sidegunner pods

• Bike Frame, saddle over small tire, no sidegunner pod (this frame version makes the rider face towards the large tire, and consequently the bike drive in that direction).

• Bike Frame, saddle over small tire, 1 sidegunner pod

• Bike Frame, saddle over small tire, 2 sidegunner pods

• Big Tire (The big tire is mounted on the Bike Frame, and can be rotated left or right if so desired).

• Main Gun Hatch (this model part is mounted on top of the central, main turret pod. There are many alternatives to this model part, sold separately. See list below).

• Bike Commander (this model part is mounted on top of the central, main turret pod. It is an alternative to the standard hatch otherwise mounted on top of the pod).

• Driver With Backpack (a dwarf biker that can be sat on the saddle portion of any Bike Frame with a saddle.)

• Driver Without Backpack (a dwarf biker that can be sat on the saddle portion of any Bike Frame with a saddle. This rider version does not have a backpack).

• Exhausts (Can be placed at either end of the bike, depending on which direction you intend the bike to travel in. Exhausts are entirely optional).

• Headlights (or taillights, if you use the Bike Frame versions that travel in the direction of the Big Tire).

• Machine Guns (this model part is technically four parts: one machine gun for the left side of the bike, and one for the right. Each machine gun is mounted on a small platform , that is in turn mounted to the side of the bike. Use images for reference. In a pinch the machine guns/platforms can be rescaled slightly and mounted on other parts of the bike ).

• Runes And Emblems (This includes a couple of different variants: A rune, a stylized wolf and a god of wind. Runes and emblems are entirely optional and can be mounted to the side of the bike or anywhere else you desire).

• Side Vent. (Small vent that is mounted to the side of the main turret pod. There are alternatives that can used in place of the Side Vent, sold separately).

• Sidegunner Hatch (a hatch that is mounted on top of the sidegunner pods).

• Trike/Quad Tires (A tire and tire suspension for either side of the bike. The extra tires can be used to create a trike or even four-wheeled vehicle. The extra tires are intended to be mounted next to the smaller tire.

• Corrugated Iron Round Base.

COMPATIBLE PRODUCTS:

https://cults3d.com/en/3d-model/game/orc-panzer-buggy-tank
https://cults3d.com/en/3d-model/game/armored-vehicle-panzer-buggy
https://cults3d.com/en/3d-model/game/panzer-buggy-autoloader-or-crusher-crane
https://cults3d.com/en/3d-model/game/panzer-buggy-rocket-mortar
https://cults3d.com/en/3d-model/game/tank-turret-pillboxes
https://cults3d.com/en/3d-model/game/anti-air-gun-turret-pillbox
https://cults3d.com/en/3d-model/game/tiger-tank-turret
https://cults3d.com/en/3d-model/game/tank-box-gun-turret
https://cults3d.com/en/3d-model/game/sidegunner-heavy-weapon
https://cults3d.com/en/3d-model/game/double-barrelled-tiger-tank-turrets

Model is prescaled for 28mm. 0.08mm layer height, 15% infill recommended. Printing time depends on printer settings, hardware, and number of model parts being printed.

https://www.youtube.com/watch?v=ovXu5cCs3qg