U.S. WWll General George Patton Ultimate Soldier 1/6 Scale Dodge WC57 Command Staff Car Rear Window Red Search light

This is a model attempted to be used on the 21st Century Toys Gral Patton's Command Car, from a Series of multiple parts I'm working with to restore mine.

It comes with a minor modification to allocate a led light or some source of light inside and take some wires out from the housing to power it up (must be printed with 5-0% infill and 1.5mm wall thickness to make a good hollow space for the light source) Images show the one I printed with the wires sticking out the lamp connected to an old cellphone battery without even soldering or having a proper housing for the led, but it worked fine!

Measeurements are not up to scale or accurate to the original car, but the toy (and maybe three bracket should be mounted a little back but the fitting is just nice!).

Many photographic references I had from real models (Thanks to https://www.command-car.com to indirectly provide them!) said that the toy would be not accurate, but who knows!

Comes in two separated parts "Reflector" is the main Body, print it in olive or black, and you might want to print the other one named "cristal" (the word is in spanish is not a typo) in clear red, so you have that effect when you turn your light on, in case you decide to.

This is intented to be used with the toy, but if you are modelling one, we might trade models, send me a message!

Wait for jerry cans, cannisters for them, Spare tires and more for this particularly difficult to find modell!,

Glass:

30-50% speed!

Shell Tickness: 1.5

Upper thickness .4

Layer .1

no bottom infill (for transparency)

Infill: 26% square, 1 line to give a more realistic aspect.

No sports needed.

Reflector:

Layer .1

0% infill would be great

1.5 mm thick walls

No bottom infill so it can be easierer to clean and insert the light

Support 26% because the stl behaves weird and it will do the job fine.