MK23 CARBINE KIT | FAMAS A1 STYLE

3D ARMY® present this kit, so that you can transform a simple STTI, SSX, ASG or Tokio Marui MK23 pistol into an carbine. The design was highly inspired by a FAMAS A1, having some aesthetic similarities.

Assembling this kit does not require any training or knowledge of a gunsmith. It´s a starter kit, which already comes with a detailed instruction manual.

In terms of components, it´s divided into a upper reciever a lower reciever and a fake FAMAS mag that allows you to safely transport an additional MK23 mag .

List of components needed to assemble the kit.

• 3D printed parts
• 1x M3 x 20mm
• 2x M3 x 35mm
• 1x M3 x 38mm
• 1x M3 x 25mm
• 3x M3 Nut
• 4 mm Ø spring x 15mm lenght
• 2x M4 x 190 mm length rod
• 2x M4 x 90 mm length rod
• 3x M4 x 35mm
• 1x M4 x 40 mm
• 4x M4 Nut
• 1x M6 x 50 mm
• 1x M6 Nut

Extra Top Rail (To mount scope or red dot sights, or another type of sight)

• 1x 8x 25mm Hex head
• 1x M8 Nut

This kit already has two barrel extenders to use suppressor or tracer or whatever is needed

Threaded extension:

• 16 CW to 16 CW
• 16 CW to 14 CCW

This kit has an access to adjust the hop up with the mod. TDC!

Note:

• It´s important to glue the two parts that form the upper reciever well, through the threaded rods and the fittings that the pieces already bring

• It may be necessary to use light sandpaper to adjust some parts depending on your printer's tolerances.

Join the revolution and march with us!

Follow uns on Instagram
@3d_army_armory

Alert!

3D Army don´t assume any responsibility for the misuse, misconduct or damage that it may cause to itself or others of any of the products that we have available for download developed strictly for the practice of airsoft or paintball.

It´s absolutely forbidden to use any of our files for real weapons!

Layer height: 0,18mm
Wall thickness: 3 mm
Infill: 50% (Minimum)
Speed: 40mm/s - 50mm/s