Skip to content

Fireman Sam Inspired, Solar Powered Fire Station

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.6k views
  • 11 likes
  • 122 downloads
License
3D design format
STL Folder details Close
  • BasePlate.stl
  • DoorHandle.stl
  • GarageDoor.stl
  • GarageDoors.stl
  • RoofBigPrint.stl
  • Roof_big.stl
  • Roof_small.stl
  • SmallDoor.stl
  • Solar_box_1.stl
  • Solar_box_2.stl
  • Solar_box_3.stl
  • Solar_boxes.stl
  • Solar_holder_left.stl
  • Solar_holder_middle.stl
  • Solar_holder_right.stl
  • Solar_holders.stl
  • UpperWalls.stl
  • Walls.stl
  • WindowFrameLower.stl
  • WindowFrameUpper.stl
  • WindowFrames.stl

Learn more about the formats
Publication date 2021-03-15 at 04:24
?
Published to Thingiverse on: 2018-04-11 at 21:09
Design number 331307
Depronized

Depronized

3D printer file info

3D model description

My son is obsessed with the animated show "Fireman Sam", and his absolute favorite toys are two fire trucks, so I decided to make a fire station for the trucks, inspired by the one in the series. It's not a scale replica, it's just inspired by the series.

The construction is prepared for cheap solar powered LED's meant for gardens, with roughly 47mm diameter (of the inner plastic housing displayed in the picture). I also include square holders if you want to disassemble the garden lights more and make it look nicer, I had to rush this build so I decided to keep the lights as intact as possible, just placing them on the roof.

Note! You can use the pre-assembled STL's for the solar holders/boxes and for the roofs! Then the roof parts are connected by a 1mm thick piece so you easily can break them apart after printing.

Printing is very straight forward, I used the fast profile in Slic3r Prusa Edition, which means 0,35mm layer height. I got a few bad spots on the surfaces but nothing too bad. You can of course go for finer resolution if you print this, but in my opinion going below 0,25mm is just a waste of time. Use low infill, 5-10% for the walls and 15% for the base plate.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.