Tommy Angelo Diorama

This product is a digital 3D model of Tommy Angelo with Sergio Morello from the iconic game, Mafia: Definitive Edition ready to be 3D printed. This is not a physical product.

Files contain pieces of the figure ready to be 3D printed and complete figure files that are not cut into smaller pieces.

The model is meant to be post-processed after printing. This can be sanding, glueing, painting,…

SIZE

At 100% scale the figure’s dimensions are:

Width approx. 423 mm

Height approx. 318 mm

The diameter of the round base is 423 mm

You can scale the model as you like.

If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion

3d-mon.com

This model was created by someone from our 3Demon team. It is fan-made. We are a group of modelling and 3d printing enthusiasts, who work in a 3D makerspace located in Prague, Czech Republic. We make cosplay accessories, technical gadgets and much more. Have a look at our Facebook page or visit our website to find out more about us:

facebook.com/3Demon.3Dprint/

3d-mon.com

We recommend a layer height of 0.1 to 0.2 mm on FDM printers. We recommended printing this model on an SLA printer for a better final result. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the model shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.