Filament spool shelf / étagère bobines de filament

Here is a shelf model for standard filament spools (Ø100 to Ø210mm).

Allows you to easily store any coil against any type of wall and thus save space. The coil is simply placed on two rods and can therefore be removed very quickly.

The brackets are fixed with Ø5 mm screws (2 per bracket) in wood or with dowels for any other type of material.

Characteristics :

• expected diameter of the wooden rods: 18 mm

• rod center distance: 110 mm

• center distance of screw holes: 86 mm

-width of the support: 35 mm

-support height: 110 mm

In my case, the rods measure 120 cm, which allows to store more or less 17 coils of 7 cm wide, or about 17 kg.

Do not hesitate to support me with a simple donation.

================================================

Here is a model of shelf for standard filament spools (Ø100 to Ø210mm).

Allows you to easily store any spool against any type of wall and thus save space. The coil is simply placed on two rods and can therefore be removed very quickly.

The brackets are fixed with Ø5 mm screws (2 per bracket) in wood or with dowels for any other type of material.

Features:

-planned diameter of the wooden rods: 18 mm

-centre distance of the rods: 110 mm

-centre distance of screw holes: 86 mm

-bracket width: 35 mm

-stand height: 110 mm

In my case, the rods measure 120 cm, which allows to store more or less 17 coils of 7 cm wide, or about 17 kg.

Feel free to support me with a simple donation.

#FIVERRCULTS

Artillery SideWinder X1

Layer height: 0.2 mm

Nozzle size: 0.4mm

Infill: 20

Material: black PLA

Bed temperature: 40 ° C

Nozzle temperature: 200 ° C

Supports are useless

================================================

Artillery SideWinder X1

Layer height: 0.2 mm

Nozzle size: 0.4 mm

Filling: 20%.

Material: black PLA

Plateau temperature: 40°C

Nozzle temperature: 200°C

Brackets are not necessary