Stonecutter Can (12oz and 16oz) to Stein v3

This complete redesign makes the main mug, handle, and lid match much closer with the version in the episode of the Simpsons "Homer the Great". And now the lid won't hit you in the face while trying to drink.
https://www.youtube.com/watch?v=dSpOjj4YD8c

Video demonstration:
https://youtu.be/AG-_UguZzHU

There are six (counting one alternate) pieces total. All necessary supports are pre-applied to the models (there is no need to add additional supports). The main body of the stein/mug prints with cylindrical supports, the left/right lid have perforated supports, the lid top doesn't require supports (but I've included an additional version with supports in case your printer has issues with it). There is a spacer included for allowing you to place a 12oz (instead of a 16oz) can inside (rather than having to print a differently sized stein).

Insert a 16oz can; or the spacer and a 12oz can. You can also use an unsealed can as an insert (available from micro-breweries and cideries upon request), or use tool that cuts the top off of a sealed/filled can.

Now can be optionally printed as individual parts. Either to make for easy spray painting, or for printing in individual colors. See the last photo. Mug body was printed in Wood PLA. Lid and bands were printed in Silver Silk PLA. Shield and logo were printed in white and spray painted blue and red. Parts where then either snapped or glued into place.

Or print the included larger version that will hold a Libbey Classic Can Tumbler Glass. https://www.amazon.com/Libbey-Can-Shaped-Beer-Glass/dp/B07BR5MVJS

I've printed these steins in both PLA and PLA+. They are not dish washer safe, nor food safe. However, your beverage is not actually coming into contact with the stein, you will always be drinking from the can inserted into the stein.

This package is licensed for personal use only. Not licensed for redistribution. Not licensed for commercial use.

Instructions included in the download.
Most pieces print well at 0.2mm resolution and a 0.4mm nozzle. I was able to cleanly print the main mug with a 0.6mm nozzle.