Skip to content

Bungee Clips for tarps

Bungee_Clips3_x4.png Bungee Clips for tarps
Bungee_Clips_v1_x4.png Bungee Clips for tarps
Bungee_Clips_v1.png Bungee Clips for tarps
Inside_Shot.jpg Bungee Clips for tarps
Outside_shot.jpg Bungee Clips for tarps
22feffd90f43ad3c03a73fa06ca98bea.png Bungee Clips for tarps
Bungee_Clips_v1_x4.stl Bungee Clips for tarps
Bungee_Clips_v1.stl Bungee Clips for tarps
Bungee_Clips3_x4.stl Bungee Clips for tarps
Bungee_Clips4.stl Bungee Clips for tarps
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 709 views
  • 2 likes
  • 18 downloads
License
3D design format
STL Folder details Close
  • Bungee_Clips3_x4.stl
  • Bungee_Clips4.stl
  • Bungee_Clips_v1.stl
  • Bungee_Clips_v1_x4.stl

Learn more about the formats
Publication date 2021-03-28 at 06:39
?
Published to Thingiverse on: 2015-12-20 at 00:31
Design number 347104
Lorrainedelgado3DBEES

Lorrainedelgado3DBEES

3D printer file info

3D model description

I have a great little trailer that I use to haul everything. The problem is that the eyelets on the tarps don't line up with the tie-downs on the trailer to allow the tarp to pull tight and/or straight. Here is the solution I came up with:

The small hole is the bungee hook hole. The 'disco ball' gets wrapped in the tarp, then pushed through the large hole and pulled through far. The tarp is then slid along the keyhole section and pulled tight, the disco ball then disallows the tarp from pulling through and allows you to attach the bungee at any point on the tarp. If you put the disco ball on the inside of the tarp. it allows the bungee to also hold the tarp ends down a little thereby reducing some of the flapping in the wind.

This is not designed to be used on the same spot on the trap over and over. If you have the tarp on the trailer or load for a long time, make sure you check the wear on the tarp and/or move locations on the tarp to make sure you don't rip through. (The hole in the disco ball is to allow you to tie it to a location on the trailer so you know where it is at any time.)

I'll have pics of how I have mine set up soon.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.