AM8 Bottom Plate Brackets for ISO7380 M5 10mm screws + DIN125 (ISO7090) washers

This is a customized version of http://www.thingiverse.com/thing:2503622 to use it as an bottom plate alternative of the AM8 with ISO7380 10mm long M5 screws and ISO7090 M5 washers with a total height of 3.54mm (2.54mm screw head + 1mm washer). This ensure a flush mount of the screws.

Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2503622

If you need some hammer nuts with a good value for money, I can highly recommend these ones: hammer nuts
I used the Drillpro M5 hammer nuts for my AM8.
They also offer some cheap 2020 aluminium extrusion profiles

#####Aluminium Extrusion Series
This is part of my Aluminium Extrusions series (https://www.thingiverse.com/mightynozzle/collections/aluminium-extrusion). Follow me, if you want to be informed about a new part of this series!

####How to support me?
Do you like my things and do you want to support me? You can use these links if you want to buy something. This helps me doing more things. Thanks!

Banggood: https://nozz.li/bg
AliExpress: https://nozz.li/ali

Using the following options:

screw_head_offset_diamter_in_millimeter = 11.0
screw_hole_diameter_in_millimeter = 5.3
number_of_extra_holes = 1
length_in_millimeter = 60
screw_head_offset_height_in_millimeter = 3.6
width_in_millimeter = 20
bracket_height_in_millimeter = 7
number_of_rails = 1