Desktop 3d Printed Hydroponics
Desktop 3d Printed Hydroponics
Published 2015-06-11T03:53:47+00:00
I made this to grow some cat grass (Barley) and catnip for my cat. Instructions on how to setup your very own 3d printed desktop hydroponics system can be found here: http://www.instructables.com/id/Desktop-3d-printed-hydroponics/ Please feel free to vote for my project on the 3d printing contest!
Print at 0.2 mm layer height, with 10% infill. This uses 85 g of filament and takes 16 hours and 50 minutes. Printed on 0.4 mm nozzle with 1.75 mm ABS Supports needed Print settings: Nozzle Temp 235c Bed Temp: Layers 1-4 100c Layers 4-End 85c Layer Height: 0.2mm Shells/Perimeter: 3 Top/Bottom solid layers: 4 Infill: 20% Skirt outlines: 2 Skirt Layers: 120 (Prevents warping on lower part of print and delamination) Print Speed 60mm/s
Date published | 11/06/2015 |
Time to do | 1010 - 1020 minutes |
Material Quantity | 85 g |
Dimensions | 120 mm x 120 mm x 81 mm |
Complexity | Easy |