HOLSTER FOR GRENADE LANCE "BREACHER 40mm

Hello, you will find here the files for the holster I designed for the "Breacher 40mm" airsoft grenade launcher that installs on soft loops.

(Here is the link of the grenade launcher in question ==> https://cults3d.com/en/3d-model/game/lance-grenade-40mm-breacher )

This holster is also compatible with Swiss arms AdaptX universal holster attachments. With a sturdy design, you will be able to run or jump with it without fear of vibration or dropping your replica. The retention is very good and the replica is well secured.

I would also recommend using loctite or threadlocker to prevent the assembly screws from loosening.

To complete the holster assembly you will need:

• 2 M3 screws length 40mm (non countersunk head) + M3 nuts

• 2 x 45mm long M3 screws (non-countersunk head) + M3 nuts

• 1 M4 screw length 20mm (non-countersunk head) + M4 nuts

• 1 M6 screw length 16mm (non-countersunk head) + M6 nuts

Also provide a paracord style elastic preferably for the retention of the grenade launcher in the holster!

To have the following parts printed at 100% fill:

• Molle 360° adapter )with normal zig-zag supports)

• End cap 360° (with normal zig-zag holders)

• Knob (no brackets needed)

• Both assembly wedges (no brackets needed)

Allow approximately 80% fill for the following parts with tree supports:

• Support

• Connection

• Base

The recommended orientations for making the prints are in the photos in the description. The orientations are the same for both assembly wedges.