Space Dwarf Aviators

Intended for 3d print.

Please note : This is a variant of the Space Dwarf Rocketeers pack, also available from Sharedog Miniatures (link below). The main difference is that the Aviators wear propeller backpacks, while the Rocketeers wear rocket backpacks. There are also some variations in poses and equipment.
https://cults3d.com/en/3d-model/game/space-dwarf-rocketeers

Airborne dwarf dogfighters, Glenlivet division. Suitable for 28mm battle-or-skirmish size tabletop games.

The pack contains a total of 12 unique dwarf models (see image gallery for a complete visual presentation of every model) wielding revolvers, shotguns and big, big bombs.
The pack also comes with 2 standard round bases ( corrugated iron and stone rubble).
It also contains a simple flying stem. Please note that the flying stem is intended for general use with flying units and vehicles, and not the Space Dwarf Aviators specifically. Depending on your taste, you may want to use a flying stem from another source if you intend to put the Aviators in flying poses.
Finally, it contains a small selection of accessories (a shield, a hammer, a rifle, a beer cask, a pair of binoculars, a shoulder-mounted floodlight, a holstered pistol and a shoulder-mounted mortar) for further customizing the miniatures.

Sharedog Miniatures produces many other types of Space Dwarves, available from the webstore. There is also a Dwarf Panzer Bike and Rocket Knarr flying vehicle (and attendant crew), intended for use in a Space Dwarves army.

The models in this squad are all packaged in separate .stl files for each model. The .stl files are in turn packaged into two .rar archives. The models are all prescaled to 28mm scale.

If you have any questions or comments, feel free to contact me.

Anyone interested in (semi)regular news and updates from Sharedog Miniatures can follow me on Instagram, under the handle #sharedogminiatures .

Other Space Dwarf miniature packs (as of 2021)

https://cults3d.com/en/3d-model/game/dwarf-head-megapack

https://cults3d.com/en/3d-model/game/space-dwarf-aviators

https://cults3d.com/en/3d-model/game/space-dwarf-war-stilts

https://cults3d.com/en/3d-model/game/space-dwarf-rocketeers

https://cults3d.com/en/3d-model/game/space-dwarf-electrolytes

https://cults3d.com/en/3d-model/game/space-dwarf-megapack-version-2

https://cults3d.com/en/3d-model/game/space-dwarf-stormers

https://cults3d.com/en/3d-model/game/space-dwarf-astroknight-berserkers

https://cults3d.com/en/3d-model/game/astroknight-dwarf-extractors-megapack

https://cults3d.com/en/3d-model/game/astroknight-dwarves-megapack-version-1

https://cults3d.com/en/3d-model/game/astroknight-dwarves-heavy-squad

https://cults3d.com/en/3d-model/game/rocket-knarr-dwarf-crew

https://cults3d.com/en/3d-model/game/dwarf-panzer-bike

https://cults3d.com/en/3d-model/game/rocket-knarr

https://cults3d.com/en/3d-model/game/tsar-mortar

https://cults3d.com/en/3d-model/game/nebelwerfer-artillery

https://cults3d.com/en/3d-model/game/space-dwarf-rocket-apc

Intended for print in 28mm scale.
Models are all prescaled to 28mm scale.
Relatively high printer settings are recommended (0,08 mm layer height, 20 percent infill).
Printing time depends entirely on hardware, selected size, selected model(s) selected settings et cetera. A rough estimate is 1.5 hours printing time for a single model.