1:200 Weapons Pack

This package contains low poly models of various types of ordnance used by most of the aircraft I have made so far.
Time period covered (without claiming to be exhaustive) is from 50s and 2000 circa and goes from unguided rockets to radar guided air to air missiles with also some "service" load as the jamming pod AN-ALQ-119 or the multiple rack ejectors used to fit extra weapons on a single pylon.
Some model have its specific rail, some not and some is provided both with and without.

Models list:

Rockets
FFAR Mighty Mouse, LAU-3A, LAU-131A, MatraRocketPod, S-24, UB-16-58.

AA Missiles
AA-8_Aphid, AIM4C-D Falcon, AIM-7 Sparrow, AIM-9 SIDEWINDER, AIM26B Falcon, AIM-54, AIM-120 AMRAAM, Firestreak, Matra Magic, Python3, R-13/AA-2 ATOLL, R-23R/ R-23T AA-7 APEX, R-27R/R-27T AA-10 ALAMO, R-33 AA-9 AMOS, R-40R/R-40T AA-6 ACRID, R-55 AA-1 ALKALI, R-98R/R-98T AA-3C ANAB, R530, RedTop,SHAFRIR 2, Super530F.

AG missiles
AGM-12, AGM-45, AGM-62A WALLEYE, AGM-65 Maverick, AGM-78, AGM-84, AGM-88 HARM, AJ168_Martel, AM-39 Exocet, AS30, AS37_Martel, BAe_SeaEagle, Kh-23_AS-7_KERRY, KH-29L_AS-14_Kedge,

Bombs
BL755, BLU-1, BLU-27, CBU-24, FAB-250 M-62, FAB-250, FAB-500 M-62, FAB-500, GB500lb, GB1000lb, GBU-8 HOBOS, GBU-10, GBU-12, GBU-16, GBU-24, GP_500lb_ANM64, GP_500lb_ANM64A1, GP_1000lb_ANM65, GP_1000lb_ANM65A1, MK-20, MK-82, MK-82_RET, MK-83, MK-83_RET, MK-84, MK-117.

Others - AN-ALQ-119 , MER, TER

23/05/2021 update1:
AN-ALQ87, AS-34_KORMORAN,GB_WWII_GP500lb, GB_WWII_GP1000lb, GB_WWII_MC1000lb, KAB-500L, KH-31_AS17_Krypton, Matra_155_SNEB, MICA-EM, MICA-IR, R73_AA-11_ARCHER, R77_AA12_ADDER, SUU--23A.

There is also an image that resumes all models with stl file name and nationality insignia; no other infos are provided so you will need to know where specific object can or cannot be used, but researching is source of fun for people that love military aircrafts, isn't it?

To use this pack is required a minimum skill in managing stl files; you can choose the ordnance you want to ad to your model, print and glue it to the model or merge all the stl in your slicer and print your custom configuration or use a 3d editor (such Blender) that can read .stl files in order to build your own variant, remembering that it will be for your personal use only and that in no way and nowhere you can publish/sell it.
Most of my models (aircraft and weapons) have small protrusions to facilitate placement; please always use photos as a reference to be sure to avoid big inaccuracies, unless it is deliberate intention, of course.
For better results, i suggest to use a FDM with 0.2 mm extruder or better a MSLA if you want to print ordnance separately.
The rack ejectors (TER and MER) have to be used with AG weapons , usually MK-82 as shown in the image attached, but as said, use some extra docs for other combinations.
In the images some example of weapons printed seaparately at 1:200 and also some pics made by a friend (thanks a lot KJGIL) who uses a 3d editor to add ordance to aircrafts in order to prints models at 1:285 scale, with very good results as you can see.

Stl files are scale 1:200 ; for other scales use the following values into your slicer:
for 1:100 use 200%
for 1:144 use 139%
for 1:200 leave 100%
for 1:285 use 70%
for 1:300 use 66%

Print test 1:200 and 1:285 mades with a MSLA at 50micron resolution.

This creation is reserved exclusively for private and personal use; redistribution of these files, as they are or modified, is not permitted. For further details read the "Copyright" section in the FAQ section of Cults site by clicking on the (C) symbol below.

ciao

Enrico