Lost ruins of Arnak organizers

Organizers for Lost ruins of Arnak board game. They fit the game box very well and provide quick game set up. Lids of containers are decorated with theme reliefs to highlight the atmosphere of the game.

The whole set contains 2 resources organizers, 4 player items' organizers, card tray, site & guardian organizer, assistance organizer, temple tile organizer and automa tile organizer. Each resources organizer has a lid and a screw that stabilize the lid and functions as a handle. The player items' organizer has a different lid. This lid has 2 small bulges that must be inserted into indentations in the container, thus it can be easily opened and closed. There are 4 lids with a different relief for each player. These ornaments are related to Arnak guardians. There are a lot of items in this set, but each stl file has a proper name.

1. RESOURCES ORGANIZER 1: This organizer consists of: res1 container, res1 lid and the screw. It has 5 sections for 5 different tokens: coin, compass, tablet, arrowhead and jewel. Each section has a rounded bottom to facilitate the draw. Reliefs on the lid are related to Arnak guardians. The lid has a hole for the screw and the handle to facilitate opening.
2. RESOURCES ORGANIZER 2: This organizer consists of: res2 container, res2 lid and the screw [the identical as for the resources organizer 1]. The res2 container has 4 sections. 2 bigger ones are for: idol and research bonus tiles. They have rounded bottom to facilitate the draw. 2 smaller sections are for: blocking and reserve tiles. Theme reliefs decorate the lid. The lid has a hole for the screw and the handle to facilitate opening.
3. PLAYER ITEMS' ORGANIZER: This organizer consists of: a player container and a lid. For each player a lid with a different guardian's ornament is designed. Still the container is the same. The bottom in this container is sloped, so it's easy to take cards out. The slope has indentations, where wood tokens and figures are kept. Sections for these items are big enough to easily pick items up. I printed these organizers with 0.15mm layer height and the lid works perfectly - it's easy to attach and later it can be opened and closed without a problem.
4. CARD TRAY: It is a tray with 3 sections for 3 decks: artifact, fear and item cards. A sloped bottom facilitate the draw. There's also a thin pocket for a moon staff and a starting player marker - it helps to prevent them from damage during the storage.
5. SITE & GUARDIAN ORGANIZER: Site and guardian tiles are kept here in 3 sections. There are indentations to facilitate the draw. Thicker walls reinforces this container. Level I, level II and guardian tiles differ in their dimensions, so each section is a little different. Reliefs on the bottom indicate the deck arrangement.
6. ASSISTANCE ORGANIZER: This organizer has 3 section for 3 decks of assistance tiles that are available during the play. It is designed to facilitate the tiles draw and to fit the game box [it's length is related to both resources organizers].
7. TEMPLE TILE ORGANIZER: This organizer is related to the game set up of temple tiles, so it fit the game board. There are different indentations to facilitate the draw during the play.
8. AUTOMA ORGANIZER: It is designed to facilitate both the storage and the solo play as well. Its height is related to 10 tiles deck. Indentations provide easy access to tiles.

Some photos in higher resolution:
Arnak organizers set
Arnak game set up - With these organizers set a supply board is no needed.
Arnak organizers storage
Arnak resources organizer 1
Arnak resources organizer 2
Arnak temple tile organizer on the game board

All organizers were 3D printed on Prusa MK3:
- in PLA (F3D gold pearl),
- No support is needed,
- Infill 10% rectilinear.
Default settings for 0.15mm layer height with small modifications in some cases:
- 04. - 0.2mm layer height,
- 05. - monotonic top fill,
- 03. - lids: Ironing enabled for Height range modifier 2.35-2.45mm,
- 01/02 - lids: Ironing enabled for Height range modifier 1.90-2.05mm,
- 01/02. - screw 20% infill.
Place the screw on the top to avoid supports.

Printing Time (for one organizer of each kind):
01.Container: 7h57'
01.Lid: 5h39'
01/02.Screw: 40'
02.Container: 6h12'
02.Lid: 4h22'
03.Container: 2h30' [x4]
03.Lid: ~2h [x4]
04: 6h31'
05: 8h5'
06: 2h11'
07: 2h3'
08: 2h17'