Abomination Hulk, from movie The incredible Hulk 2008, with Edward Norton, File STL for 3D Printer FDM-FFF SLA.-DPL-SLS Model Printing Miniature Assembly

follow me
FACEBOOK: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks

ISTAGRAM: cody3d1 https://www.instagram.com/cody3d1/

TWITTER: https://twitter.com/Cody3D
ARTSTATION: https://www.artstation.com/cody3d/store

Abomination Hulk, from movie The incredible Hulk 2008, with Edward Norton, File STL for 3D Printer FDM-FFF SLA.-DPL-SLS Model Printing Miniature Assembly

YOUTUBE Video: https://youtu.be/5mb5IeCRVH0

Two size 1:20 for FDM-FFF, 1:40 for DLP-SLA-SLS

Assembly Figure
more than 200 hours of modeling
two versions
however, the dimensions can be changed with each slicer

in total is composed of 5,936 mil points
all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

dim approximately FDM-FFF D 18Cm W 18Cm H 24 Cm
D 7Inch W 7inch H 9.4inch

dim approximately DLP-SLA-SLS D 9.5Cm W 9.5Cm H 12Cm
D 3.7inch W 3.7inch H 4.7inch

all files are already in place for optimal printing

Abomination Hulk 3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale,
every part of the model in the most convenient way for you.
Each file has been checked and repaired with Netfabb
The parts of the model are already positioned for 3D printing
Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...
All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

The Incredible Hulk is a 2008 American superhero film based on the Marvel Comics character the Hulk. Produced by Marvel Studios and distributed by Universal Pictures, it is the second film in the Marvel Cinematic Universe (MCU). It was directed by Louis Leterrier from a screenplay by Zak Penn, and stars Edward Norton as Bruce Banner alongside Liv Tyler, Tim Roth, Tim Blake Nelson, Ty Burrell, and William Hurt. In the film, Bruce Banner becomes the Hulk as an unwitting pawn in a military scheme to reinvigorate the "Super-Soldier" program through gamma radiation. Banner goes on the run from the military while attempting to cure himself of the Hulk.
After the mixed reception to Universal's 2003 film Hulk, Marvel Studios reacquired the rights to the character though Universal retained distribution rights. Leterrier, who had expressed interest in directing Iron Man for Marvel, was brought onboard and Penn began work on a script that would be much closer to the comics and the 1978 television series of the same name. In April 2007, Norton was hired to portray Banner and to rewrite Penn's screenplay. His script positioned the film as a reboot of the series, distancing it from the 2003 film to give the new version its own identity. Norton was ultimately not credited for his writing. Filming took place from July to November 2007, primarily in Toronto, Canada, with additional filming in New York City and Rio de Janeiro. Over 700 visual effects shots were created in post-production using a combination of motion capture and computer-generated imagery to complete the film.
The Incredible Hulk premiered at the Gibson Amphitheatre in Universal City, California, on June 8, 2008, and was released in the United States on June 13, as part of Phase One of the MCU. It received generally favorable reviews and was considered to be an improvement over the 2003 film. The film grossed $264.8 million worldwide, making it the lowest-grossing film of the MCU. Norton disputed with Marvel over the final edit of the film and was replaced in the role of Banner by Mark Ruffalo for future MCU content starting with The Avengers in 2012.
wikipedia

Recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts,
it is recommended to print with a 4-5 skirt

Quality
Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of
the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:
Infill speed: 30mm/s
Outer shell speed : 30mm/s
Inner shell speed: 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:

Infill pattern: Grid
Line distance: 1.5mm
Infill overlap: 20%
Infill layers: 0
Support:

Enable support: Check
Placement: Everywhere
Overhang angle: 30°
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: check
Pattern: Grid
Line distance: 1.5mm

LEGAL PRIVACY POLICY: Any UNAUTHORIZED use of my profile, video, pictures or audio in any form or in a forum now or in the future is NOT permissible without my expressed written consent.
Any act to promote or gain profit in any manner (e.g. either monetarily or socially) from the use of my profile, video, pictures or audio in any form my profile is a violation
of my privacy and subject to legal action. BY WATCHING THIS: You acknowledge and agree that you shall not post, upload, publish, transmit or make available in any way content of this
page including images and recording streamed live video available for download. This is intended as, and presented as a one time, live, one view presentation only.
Penalties of Copyright Infringement: By reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing
on his or her rights under the Copyright Act. The copyright holder may sue for compensation cost from $ 250 to $ 150,000 or one year jail sentence