Oral-B Support

Here I leave a wonderful support for Oral-B electronic toothbrush with compartment to store the original brushes of Oral. is based on the original Braun. It has a movement of the brush compartment that gives it a point of great sophistication. The rotation axis of the lid is made with a lollipop stick, which is made of polypropylene and works like a charm. You will have to cut with the blade, two pieces that fits the pivot points, and a toothpick, round is the pusher, is enough for what the pusher has to do. But I like to use things that we can all get our hands on without any problems. So buy a lollipop when you can, and when you pass a bar you can ask for a toothpick at the bar, they're always round.

(Update)

Regarding the rendered images there are small modifications to improve the rotation performance.

I also leave you a file named pik, which is a small replacement of the cover in case you find it hard to print as I did. I did it in ABS and it cost me to come out because of the high temperature, so I cut the deformed piece and put the spare that I printed flat and hooked it in my case with Acetone, I think that in PLA, you will not have any problem.

Perfect working.

everything is printed with two contours and 100% padding, all the pieces are printed without padding. All the pieces have a thickness of 2 mm, except in some specific areas to avoid supports (very small areas).