Skip to content

Ai3M X-Carriage [MK3] (Mosquito-NF Crazy) - Remix (still compatible with V6)

Advertising
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

  • 2.2k views
  • 25 downloads

License
3D design format
STL Folder details Close
  • AI3M-MK3_Coverplate-Remix4Mosquito.stl
  • AI3M-MK3_Frontplate-Remix4Mosquito.stl
  • AI3M-MK3_fanduct-Remix4Mosquito.stl

Learn more about the formats

Publication date 2021-04-17 at 00:41
?
Published to Thingiverse on: 2020-07-19 at 10:50
Design number 368763

3D printer file info

3D model description

update 23.07.2020
It is "Alive!"
Testing looks good.
I edited the fanduct to "shrug" a bit, so that the fanduct wont crash into the printbed before the nozzle.(Because of that i had to file one screw of the endstopholder flush. This only takes about 2-3 Minutes by hand and does not interfere with any funktions)

The Mosquito Clone sits snug inside the carriage and does not budge, even if i change the nozzle. No more "fiddeling" with a second tool just to change a nozzle.

update 20.07.2020
I have just relized, that the Part-cooling fanduct will need some work too.
In the current setup the fanduct is to low (the nozzle is to high up)
I will modify the fanduct and keep testing.

I was looking for a Remix of the MK3 x-carriage for the mosquito hotend and was not able to find one. So i made one.
I will test it in the next couple of days and if it Works, i will remove the „wip“-flag.
Let me know If you run in any errors.
It is „designed“ to be a snug pushfit.
Let me know If you run in to any problems and i will see if i can fix them.
If there is any demand for it, i will try to remix other carriages to fit the mosquito.

———————-
update 23.07.2020
"Es Lebt!"
Die ersten Tests sehen gut aus.
Ich hab den Fanduct so überarbeitet, dass er nicht mehr ins Druckbett knallt, wenn man versucht die Nozzel aufs Druckbett zu "legen". Das Fanduct sieht nun ein wenig so aus, als wenn es "die Schultern hoch zieht". (Hierdurch musste ich jedoch am Endstophalter eine der Schrauben ein wenig Plan Feilen, was jedoch nur ca 2-3 Minuten gedauert hat und die Funktion in keiner Weise beeinträchtigt)

Der Mosquito Clone sitzt satt in seiner Halterung und bewegt sich kein stück mehr, selbst wenn man die Nozzle wechselt tut sich dort nichts. Einem "Einhändigen" Nozzletausch steht nun nichts mehr im Wege, und man kann auf das 2. Werkzeug hierbei verzichten.

update 20.07.2020
Hab grad gemerkt, dass der Part-cooling-fan-duct zu tief ist.
Die nozzle ist zu weit oben, so dass sie das druckbett nicht erreicht, bevor die bauteilkühlung „aufschlägt“
Werd also den fanduct auch nochmal überarbeiten und ein wenig nach oben schieben und weiter testen

Ich war auf der Suche nach einem Remix vom MK3 x-carriage für das mosquito Hotend, konnte aber keinen finden. Daher hab ich diesen gemacht.
In den nächsten Tagen werde ich das Teil testen und sehen, ob es gut funktioniert. Wenn alles klappt, entferne ich den „wip“-flag.
Solltet ihr Probleme finden, lasst es mich wissen und ich schaue, ob ich diese beheben kann.
Es ist so „designed“, dass es eine wirklich gute presspassung hat.

Sollte Interesse bestehen, schau ich gerne, ob ich auch andere Carrier anpassen kann, damit das mosquito hotend dort verwendet werden kann. Gebt mir einfach Bescheid.

3D printing settings

-

Advertising


Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!


Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.

100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.