Skip to content

RGB Lighting for Kolink Rocket Push Power Button with Asus Aura

Screenshot_6.png RGB Lighting for Kolink Rocket Push Power Button with Asus Aura
Screenshot_7.png RGB Lighting for Kolink Rocket Push Power Button with Asus Aura
WhatsApp_Image_2020-03-02_at_22.51.04.jpeg RGB Lighting for Kolink Rocket Push Power Button with Asus Aura
Screenshot_2020-03-06-13-35-58.jpg RGB Lighting for Kolink Rocket Push Power Button with Asus Aura
rgb_led_2.png RGB Lighting for Kolink Rocket Push Power Button with Asus Aura
rgb_led_2.stl RGB Lighting for Kolink Rocket Push Power Button with Asus Aura
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.3k views
  • 1 like
  • 4 downloads
License
3D design format
STL Folder details Close
  • rgb_led_2.stl

Learn more about the formats
3D model size X 21.3 Γ— Y 24.1 Γ— Z 21.2 mm
Publication date 2021-04-20 at 01:26
?
Published to Thingiverse on: 2020-03-06 at 14:06
Design number 406534
flow_241

flow_241

3D printer file info

3D model description

This is an LED mount to give the power button of the Kolink Rocket the ability to work with Asus Aura/Gigabyte Aorus RGB Fusion.

Therefore, I removed the white pre-installed LEDs, which where just glued on and then installed my printed LED mount.

You need:
- 1x 5mm Red LED
- 1x 5mm Green LED
- 1x 5mm Blue LED
- 2x 360 Ohms resistor
- 1x 220 Ohms resistor
- some wire
- soldering iron
- transparent filament

The LEDs, that I used already have a resistor build in. They are rated for 5V, so the resistors recommended above are choosen based on this.

The 220 Ohms resistor is for the red LED, because the brightness of mine was quite low, so I choose a lower resistor to give it a little more power.

To use these LEDs with Asus Aura, you need to solder the three + legs of the LEDs together and connect them to the V+ port of the RGB header.

The - legs of the LEDs get connected to a resistor each and will then be connected to the specified color port of the RGB header.

The center drilling of this model is used for the power switch cable,
the three drillings off-center for the LEDs.

If you have further questions, feel free to ask.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.