[Available in French below]
Note : 40x40x20 fan is'nt compatible with hotend cooling.
Hello everyone.
I'm posting here my own adaptable cooling system on ALL Bullseye bases. I named it the ZEPHIR, available in 2 models I made a version for Ender fans;)
The principle of this system is to replace the radial fan with a classic 40x40 fan. and the concept of my version is to avoid all the 90 ° bends of the original bulleseye in order to have the most laminar airflow possible. To do so, I enlarged the fan outlet section to accommodate more air and "compress" more.
It is certainly bigger but it does not hit anywhere on the chassis of an Ender 5 so no worries with the Ender 3 and other printers of this kind.
Benefits :
- better air flow.
- printable without supports with the fan side against the bed.
- allows for nuts to be able to screw the fan on.
Filaments used:
- White: VERTEX white (not specially recommended)
- Gold: Silk Antique Gold from NOULEI
Downloadable file on my Thingiverse page: https://www.thingiverse.com/thing:4622729
For the fixing base, I use Raphael Delanzy's one, which can be downloaded for free here: https://www.thingiverse.com/thing:4384140
This project will potentially (depending on its success) have to be improved: more aesthetic (and other special editions;)), led lighting system, etc.
To follow these improvements, don't hesitate to subscribe to my Thingiverse and Facebook page: https://www.facebook.com/waikikiprod
[FR]-------------------------------------------------------------------------------------------------
Note : le ventilateur 40x40x20 n'est pas compatible avec le refroidissement du hotend.
Bonjour Ă toutes et Ă tous.
Je publie ici mon propre systĂšme de refroidissement adaptable sur TOUTES les bases Bullseye. Je lâai baptisĂ© le ZEPHIR, disponible en 2 modĂšles jâen ai fait une version pour les fans Ender ;)
Le principe de ce systĂšme est de changer le ventilateur radial par un ventilateur classique de 40x40. et le concept de ma version est d'Ă©viter tous les coudes Ă 90° du bulleseye d'origine afin d'avoir un flux d'air le plus laminaire possible. Pour se faire, jâai agrandi la section de sortie de ventilateur afin d'accueillir plus d'air et d'en «compresser» plus.
Certes il est plus gros mais il ne cogne nul part sur le chĂąssis d'une Ender 5 donc pas de soucis avec la Ender 3 et autres imprimantes de ce genre.
Avantages :
- meilleur dĂ©bit dâair.
- imprimable sans supports avec la face ventilateur contre le bed.
- permet dâaccueillir des Ă©crous afin de pouvoir visser le ventilateur dessus.
Filaments utilisées :
- Blanc : Blanc VERTEX (pas spécialement recommandé)
- Or : Silk Antique Gold de chez NOULEI
Fichier téléchargeable sur ma page Thingiverse : https://www.thingiverse.com/thing:4622729
Pour la base de fixation, jâutilise celle de Raphael Delanzy tĂ©lĂ©chargeable gratuitement ici : https://www.thingiverse.com/thing:4384140
Ce projet sera potentiellement (selon son succĂšs) amenĂ© Ă ĂȘtre amĂ©liorĂ©Â : plus esthĂ©tique (et dâautres Ă©ditions spĂ©ciales;) ), systĂšme dâĂ©clairage led, etc.
Pour suivre ces amĂ©liorations, nâhĂ©siter pas Ă vous abonner a ma page Thingiverse et Facebook : https://www.facebook.com/waikikiprod
Bon print à tous !