Lynda C - Wonder Woman – Part1 - by SPARX

My little Homage to Lynda's Wonder Woman costumes Part1, Classic and Swim costumes.
Both models are in this single download.

Of all the costumes used throughout the 1975-1979 TV series, these two had to be the sexiest?

So a few WW models out there but couldn’t find the “swimming” costume and I wanted one so here it is . . . and the classic costume.

The sports day at paradise island and the roller skating costume . . not even going there so please don’t ask . . however, her return to paradise island in her lilac Toga/Nightdress on the throne . . well this is Part1, so stayed tuned for Part2 – return to Paradise Island.

I have included a base for each model with magnetic attachments to hold your figures until Part2 is released, then they can all live on one diorama . .

The model is1/6 scale at 300mm high on base
No options apart from the swim upper torso one with hands and one with separate hands to fit SLA printers.
5 pieces Classic & 9 pieces swim (with option as above)
14 items in total.

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

TIPS:
Resin Printing;
Hollow 2.40 Raft 98% all except the separate hands for the swim model

FDM
ALL at Layer 0.16, Fill30%, Speed 50

ALWAYS dry assemble and “trim” parts prior gluing.
you can assemble the complete models prior to painting no difficult bits
Assemble lower torso and boots to base to help align the model.