Astora Sword - Dark Souls 3D print model

Astora Sword - Dark Souls

The sword is made from more parts to be printed easly with a i3 printer, the biggest part is the guard and my advice for printing it is set the z at 5mm high and enable supports (15-20%) and brim or raft. The other pieces can be printed without any support or adhesion base. The blade is made from 9 pieces high 10 cm to prevent any problem from vibration. to keep the entire sword more rigid I drow a hole trought the whole model to put a 8mm steel rod inside it.

General settings to print it easly: Print all with 15% infill No support, exept the handle. Print the blade pieces one by one If you have a 0.4 nozle, print the blade and the handle at 0.32, the other parts at 0.16 or 0.12.

Please, if you purchase a file made by me, don't sell print or cast of stuff made using it. If you want recast stuff made from my files feel free to contact me via email to make a deal.

Remember, all of my files are handmade, so if you find any error don't worry, you can mail me at federico.monfalcon@gmail.com with the error and I'll provide you a correct verion of the file.