Japanese Style Boathouses - Ine no Funaya Free 3D print model

Hey! Thanks for stopping by and I hope you like it!

The Houses and Roofs were made separately to reduce the amount of filament used and to facilitate the addition of lights inside the houses.

The Interior of the houses have sufficient connected space within to add LEDs.

Modelled with Blender Sliced using Ultimaker Cura Printed on the Creality Ender 3 Filament used was Tesseract White Filament

Feedback will be greatly appreciated and I'm willing to make changes/fix flaws. This is the first design I've uploaded online. Please let people know in the comments if you've had success with faster/easier methods of slicing as I haven't had the opportunity to experiment much in that area. Like and Share if you find it worthy, it really helps!

Visit my Instagram for more pictures and videos! Please credit the design if you upload your make, I'd love to share it. https://www.instagram.com/alcatraz7007/?hl=en

Thank You!

Print Settings

SCALE DOWN THE STLs TO YOUR PREFERRED SIZE THE PHOTO OF MY MAKE HAS BEEN SCALED DOWN TO 25%

For the Base Layer Height = 0.3 mm No Supports Minimal Infill is sufficient Try to maintain the speed at default so that the stilts don't break Decrease the Top and Bottom Filled Layers to reduce time Total Printing Time = 7+ Hours

For the Houses Layer Height = 0.1 mm Supports Required Enable Print Thin Walls Total Print Time = 11+ Hours

For the Roofs Layer Height = 0.1 mm Enable Print Thin Walls Support Required

Updated 19/08/2021 Added Platform STL to support a battery/electronics behind the houses to the bridge.