Dont use the Zip file included (.RAR) It is missing files.
I spent almost 6 hours sorting through the files but once I did, I will say these cockpits have WAY more detail than you will ever use.
Files print FDM well at the larger scales.
Many of the parts require supports by the way they are configured on the z-axes, additionally there are no instructions or assembly instructions. The 108 part are unidentifiable until printed. Was not impressed with the result for my printer. I was using an Artillery sidewinder with both Cura or Simplfy3d. Still need a cockpit for my Vought F4U Corsair scale 1:6.6 3DLabPrint plane.
Je n'arrive pas à ouvrir les fichiers psd!! pourriez vous me les convertir svp merci
"Caveat Emptor" for sure on this one. There is not much here in spite of all the STL files. Note: I was modifying these files to fit the Flightline 1/8th scale RC Corsair, so I knew I had work to do on the CAD side of things. Review: Difficult to scale smaller. Many parts are not to scale and inaccurate to the 1:1. There is not a parts list included. (I asked the author about a parts list and was told to print the parts and I would then understand how parts fit). Summary: Certainly not worth $19+USD but if you are building the CARF Corsair, this cockpit kit is better than nothing. If you are building anything else, design a cockpit kit your self. I did. See Hobby Squawk Forum Link: https://www.hobbysquawk.com/forum/rc-airplanes/rc-propeller-airplanes/165641-official-flightline-f4u-1a-corsair-1600mm-63-wingspan/page246#post365132 I do not like leaving a negative review, though in this case I am compelled to do so. Respectfully, Steve