Resident Jill by SPARX 3D print model

Jill Valentine in her original costume from Resident Evil franchise. There are a lot of pictures on the internet of 1/6 posable action dolls in this pose but no available solid model to my knowledge, so here is my version of Jill, with swappable legs and torso’s in two different poses for you to enjoy. The legs, torso and head parts are removable and interchangeable with magnets(see pics) The parts are interchangeable with the other torso’s and parts available in the NSFW and Add-Ons body pack, not available here . . contact/message me for details. The model is1/6 scale at H290, and 340mm height including base 2 upper torso’s options (and torso pin) 2 SLA lower torso options 1 SLA Left foot 1 head (and head pin) 2 sets of hands/weapons 1 base (FDM Only) Also included is 2 optimised FDM legs that are one piece and have thicker heels/walls than the SLA parts.

14 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS TIPS: Resin Printing; Hollow 2.40 Raft 98% Lower Torso’s/Legs, Left Foot, Heads, Upper Torso’s

Do not Hollow Raft 98% Pistol Hand, Rifles

FDM ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. Pose1; paint rifle and upper Torso separate before fixing. Pose2; glue pistol hand to torso, paint torso and rifle separate.