Fire Emblem Three Houses Crest of Gloucester 3D print model

3D printable model of Lorenz and Lysithea's Crest of Gloucester, used in Thyrsus. 53mm in diametre, can be resized to fit needs but wouldn't recommend going below 45mm as there might be some lost detail. Comes with 2 different depths: Large (titled lorge) 24mm deep, and Small (titled Smol) at 20mm deep.

has a button cell battery holder/space modelled into them, and space for 5x10x5mm magnets if being detachable is from the rest of the prop is desired. Files are in STL. My display images were printed in red PETG at 2mm layer heights on the Ender 3 and 405nm transparent red resin on an Elegoo Mars. Please do not resell the model. Made from designs from Fire Emblem Three Houses