Abyss + 2 expansions organizers

The set of organizers is dedicated for Abyss base board game and 2 expansions: Kraken and Leviathan. All organizers fit the base game box and one expansion box. They provide quick game setup. Comfort during the play is the priority in this design. Organizers are decorated with theme ornaments to highlight the game atmosphere.

Please, note, that I don't own Abyss expansions, so they don't show up on my pictures (sometimes I use substitutes to visualize proportions). The design was made to order, based on thorough measurements. I was assured that everything fits perfectly.
Card trays are designed for cards in sleeves.

The set contains: Pearl's bowl, Location tile container with dedicated separator, Location tile stand, 4 types of card trays, 2 types of card separators, Key & Monster token organizer with dedicated separator, Leviathan dice & token organizer and Statuettes container.

Pearl's bowls are used instead of cups that goes with the board game. They are very decorative, ornaments are related to the game theme. 7 pearls' bowls have to be 3d printed for the base game with expansions. They take more space than the cups in the game box, but I hope you think they are worth it.

The Location tile container accommodates locations of the base game and 6 locations of Kraken expansion. They can be divided by the Location separator. The container is 221 mm long and the separator - 227 mm.
The Location tile stand can accommodate up to 5 tiles. It is designed to keep tiles safely and to secure all captions to be well visible at the same time. It's also easier to pass on available Location tiles during the play. It has to be assembled with 3 parts: a frame, a support and a blocker. The frame accommodates available locations during the play. The support must be inserted into holes in the back of the frame. The blocker must be glued to prevent the support from falling of. It was all thoroughly designed to avoid supports in 3d printing - the right position of each model is shown on PrusaSlicer's screenshots.

There are 4 types of card trays that accommodate all card of the base game and expansions: Lord card tray, Ally card tray, Leviathan card tray and Loot card tray. 2 types of separators help to divide cards of the base game, Kraken and Leviathan - if you don't want to have them mixed. The Lord card tray and the Ally card tray are high enough to accommodate all cards in sleeves of each type, with dedicated separators. The Leviathan card tray and the Loot card tray are for cards of expansions. All items are decorated with related reliefs. Card trays have sloped bottom and indentation to facilitate the card draw.

The Key & Monster token organizer accommodates Key tokens, Monster tokens and 3 Sentinel tokens (Kraken) with a Threat token. Keys are kept in separate pockets, so it's easy to take them out during the play. Monster tokens are kept in a long section with rounded bottom - so even if tokens fall down, it's still easy to take them out. The monsters of the base game and those of the Leviathan expansion can be divided by the Monster separator. The second Monster separator can be used to separate Sentinels & Threat tokens.

The Leviathan dice & token organizer is a simple container with 3 sections. Each one has rounded bottom to facilitate item draw. The sections accommodate: 2 dice, Wound tokens and Health point tokens.

The Statuettes container secures Kraken and Leviathan figurines in the game box.

Some photos in higher resolution:
The set
Pearl's bowls
Locations
Lord card tray
Ally card tray
Packed

Link to my Abyss organizers (only the base game, cards without sleeves): Abyss organizers.

Organizers were 3D printed on Prusa MK3:
- in PLA,
- no support is needed,
- infill 10% rectilinear.
Note1: I use slightly changed default Print settings "0.15mm SPEED MK3" in PrusaSlicer.
Note2: For better quality of reliefs you can set 0.1mm layer height. I used it only for the pearl's bowl.
Note3: Location tile stand is assembled of 3 parts: a frame, a support and a blocker. After the support is attached to the frame, the blocker must be glued, so the support won't fall off.
Note4: In slicer place the Location stand parts like it's shown on the slicer screenshot - to avoid supports. For the frame you may want to set Monotonic top fill to increase the relief's quality.

Printing Time:
7h5' - Pearl's bowl
8h27' - Location tile container
1h9' - Location separator
15h50’ - Location tile stand, frame
3h29’ - Location tile stand, support
26’ - Location tile stand, blocker
4h37' - Lord card tray
1h - Lord separator
4h - Ally card tray
28' - Ally separator
3h30' - Leviathan card tray
2h50' - Loot card tray
4h34' - Key & Monster token organizer
16' - Monster separator
4h - Leviathan dice & token organizer
6h41' - Statuettes container