TAMARA LED ILLUMINATED LETTERS

LED illuminated letters Tamara.

Approx.12cm high and 52cm long

See also here: https://cults3d.com/en/3d-model/home/leon75

Has only been expanded to include the letter T.

Set support material in the penetrations only.

I can print it in one since my printer is big enough for it.

Still, I split it into individual letters so it will fit on smaller print beds.

Minimum print bed size 150mmx150mm.

In addition, there is a LED WS2815 tape.

I used this with 30LED/meter.

A 5m tape is recommended if you want to do more than one.

.

https://de.aliexpress.com/item/32961181562.html?spm=a2g0s.9042311.0.0.27424c4dw3lhea

SP002E Controller

https://de.aliexpress.com/item/10000019622803.html?spm=a2g0s.9042311.0.0.27424c4dw3lhea

It also works with the WS2815 LED tape.

DC socket 12V TYPE A

https://de.aliexpress.com/item/1005001599977955.html?spm=a2g0s.9042311.0.0.31aa4c4dR3ZrLf

12V plug-in power supply min. 2A

https://de.aliexpress.com/item/4000714936135.html?spm=a2g0o.productlist.0.0.4e9d2f6aapM6SJ&algo_pvid=06a9cdc7-bd31-40dd-ba7b-709658d39dc7&algo_expid=06a9cdc7-bd31-40dd-ba7b-709658d39dc7-2&btsid=2100bdf016083013746604823e395c&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

I soldered the controller to the LED tape due to space limitations. But I'm sure it can be done without soldering, just plugging it together.

To get the LED tape into the corners, I carefully pushed it into the corners with a hex key.

Lay it all out and give it a try.

Mount DC socket and fix everything best with hot glue, as the LED tape does like to come loose.

If you want, you can of course use other controllers with remote control, there are the files without holes.

The basic idea is from LED Marquee, he also has a video about it in his Thing.

https://www.thingiverse.com/thing:4643184

I assume no liability for any errors or damages that may occur.

Good luck