Skip to content

DH-100 Vampire 700mm (30mm edf)

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 3.3/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 9.8k views
  • 14 likes
  • 51 downloads
  • 1 comment
License
3D design format
ZIP Folder details Close
  • DH-100 VAMPIRE.zip
    • bonus extra items/1mm wire lock/fff/push rod lock 1mm.factory
    • bonus extra items/1mm wire lock/G-CODE/1mm wire stop clamp A + B.gcode
    • bonus extra items/1mm wire lock/stl/1mm wire stop clamp A .stl
    • bonus extra items/1mm wire lock/stl/1mm wire stop clamp B.stl
    • bonus extra items/CoG balancer/FFF/balancer long arm version.factory
    • bonus extra items/CoG balancer/FFF/balancer shot arm (600mm model) version.factory
    • bonus extra items/CoG balancer/G-CODE/balancer long arm version.gcode
    • bonus extra items/CoG balancer/G-CODE/balancer shot arm (600mm model) version.gcode
    • bonus extra items/CoG balancer/STL/arm.stl
    • bonus extra items/CoG balancer/STL/base plate.stl
    • bonus extra items/CoG balancer/STL/long arm.stl
    • Cura profiles/COLORFABB LW-PLA.curaprofile
    • Cura profiles/REGULAR PLA.curaprofile
    • Cura settings.pdf
    • dh-100 vampire (30mm edf)/FFF/AILERONS (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/CANOPY FRONT (PLA).factory
    • dh-100 vampire (30mm edf)/FFF/CANOPY REAR (PLA).factory
    • dh-100 vampire (30mm edf)/FFF/ELEVATOR (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/FUSE 1 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/FUSE 2 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/FUSE 3 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/FUSE 4 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/FUSE 5 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/HINGE BOX (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/HORIZONTAL STABILISER (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/PUSHER PARTS/FUSE 3 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/PUSHER PARTS/FUSE 4 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/PUSHER PARTS/FUSE 5 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/TAIL BOOM 1 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/TAIL BOOM 2 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/TAIL BOOM 3 (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/WING INNER LEFT (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/WING INNER RIGHT (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/WING MIDDLE LEFT (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/WING MIDDLE RIGHT (LW-PLA).factory
    • dh-100 vampire (30mm edf)/FFF/WINGTIPS (LW-PLA).factory
    • dh-100 vampire (30mm edf)/G-CODE/AILERONS (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/CANOPY FRONT (PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/CANOPY REAR (PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/ELEVATOR (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/FUSE 1 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/FUSE 2 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/FUSE 3 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/FUSE 4 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/FUSE 5 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/HINGE BOX (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/HORIZONTAL STABILISER (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/PUSHER PARTS/FUSE 3 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/PUSHER PARTS/FUSE 4 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/PUSHER PARTS/FUSE 5 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/TAIL BOOM 1 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/TAIL BOOM 2 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/TAIL BOOM 3 (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/WING INNER LEFT (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/WING INNER RIGHT (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/WING MIDDLE LEFT (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/WING MIDDLE RIGHT (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/G-CODE/WINGTIPS (LW-PLA).gcode
    • dh-100 vampire (30mm edf)/STL/aileron inner left.stl
    • dh-100 vampire (30mm edf)/STL/aileron inner right.stl
    • dh-100 vampire (30mm edf)/STL/aileron outer left.stl
    • dh-100 vampire (30mm edf)/STL/aileron outer right.stl
    • dh-100 vampire (30mm edf)/STL/boom left 1.stl
    • dh-100 vampire (30mm edf)/STL/boom left 2.stl
    • dh-100 vampire (30mm edf)/STL/boom left 3.stl
    • dh-100 vampire (30mm edf)/STL/boom right 1.stl
    • dh-100 vampire (30mm edf)/STL/boom right 2.stl
    • dh-100 vampire (30mm edf)/STL/boom right 3.stl
    • dh-100 vampire (30mm edf)/STL/canopy front.stl
    • dh-100 vampire (30mm edf)/STL/canopy rear.stl
    • dh-100 vampire (30mm edf)/STL/elevator left.stl
    • dh-100 vampire (30mm edf)/STL/elevator right.stl
    • dh-100 vampire (30mm edf)/STL/fuse 1.stl
    • dh-100 vampire (30mm edf)/STL/fuse 2.stl
    • dh-100 vampire (30mm edf)/STL/fuse 3.stl
    • dh-100 vampire (30mm edf)/STL/fuse 4.stl
    • dh-100 vampire (30mm edf)/STL/fuse 5.stl
    • dh-100 vampire (30mm edf)/STL/hinge box.stl
    • dh-100 vampire (30mm edf)/STL/horizontal stabiliser.stl
    • dh-100 vampire (30mm edf)/STL/PUSHER PARTS/fuse 3.stl
    • dh-100 vampire (30mm edf)/STL/PUSHER PARTS/fuse 4.stl
    • dh-100 vampire (30mm edf)/STL/PUSHER PARTS/fuse 5.stl
    • dh-100 vampire (30mm edf)/STL/wing inner left.stl
    • dh-100 vampire (30mm edf)/STL/wing inner right.stl
    • dh-100 vampire (30mm edf)/STL/wing middle left.stl
    • dh-100 vampire (30mm edf)/STL/wing middle right.stl
    • dh-100 vampire (30mm edf)/STL/wingtip left.stl
    • dh-100 vampire (30mm edf)/STL/wingtip right.stl
    • DH-100 Vampire 700MM ASSEMBLY MANUAL.pdf
    • DH-100 Vampire 700mm print settings.pdf
  • Manuals.zip
    • Cura settings.pdf
    • DH-100 Vampire 700mm (30mm edf) print settings.pdf
    • DH-100 Vampire 700MM ASSEMBLY MANUAL.pdf
  • QX30mm 7000kv EDF upgrades.zip

Learn more about the formats
Last update 2024-04-15 at 09:30
Publication date 2021-10-08 at 13:10
Design number 538328
3D_Aeroworks

3D_Aeroworks

3D printer file info

3D model description

Discounted version available here:
https://rc3dmarket.com/yakovlev-yak-3-600mm-lw-pla-instruction-manual-and-parts-list-1

This scale replica of the De-Havilland Vampire is designed for quick and easy construction and printed using light weight PLA (LW-PLA). For best results the canopy should be printed with clear PLA. Designed to suit the QX-MOTOR(7000kv) 30mm edf unit. Utilising 3 channel controls; aileron, elevator and throttle, this model performs extremely well given its small size and lightweight.

This model is recommended for the pilots with intermediate skills.

TEST FILES HERE:
https://cults3d.com/en/3d-model/various/dh-100-vampire-700mm-30mm-edf-or-pusher-test-files

Included with this file:

Factory files for Simplify 3d
STL files for all components
G-code files for all parts
Cura profiles for LW-PLA and regular PLA
Detailed assembly manual and user guide
Print settings guide for all parts
part orientation images

FLIGHT VIDEO:
https://www.youtube.com/watch?v=gJiHzHQagEA

Print time: 60hrs
Print weight: 165g
RTF AUW: 350g with gear listed below installed

REQUIRED COMPONENTS:
X1 qx-MOTOR 30mm edf 7000kv(or similar)
X1 20AMP ESC
X1 1000MAH 3S LIPO OR SIMILAR
X4 3.7G MICRO SERVO
X2 10mm X10mm X 2mm MAGNET (ROUND)
X6 MICRO HINGES (optional)
VELCRO

PRINT VOLUME:
200x200x200

For any questions and assistance please email us at:

aeroworks3d@outlook.com

NOTE: All STL files need to be enlarged to 1000% if using a program other than simplify3d.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.