2g mini filament test

When you get a new filament you often first have to find out the best print parameters. This model is very suitable for assessing the print quality, as it only requires 2g of filament when you print it with 20% filling. So you can make a lot of test prints without wasting a lot of filament.

Only when this model is properly printed can the famous 3D benchy be used. Here in the pictures you can see experiments with TPU, of course any other filament can be used. The model has overhangs and bridges and is very suitable for assessing printer settings.

------------------ German --------------

When you get a new filament, you often have to find out the best printing parameters first, and this model is very suitable for assessing the print quality, as it only requires 2g of filament if you print it with 20% infill. So you can make many test prints without wasting a lot of filament.

Only when this model is printed properly, you can use the famous 3D-Benchy. Here in the pictures you can see experiments with TPU, of course any other filament can also be used The model has overhangs and bridges and is very suitable for assessing printer settings.

The associated Sketchup file allows you to make your own changes.

The Sketchup file as well as STL can be downloaded free of charge from the following page

https://www.tueftler-und-heimwerker.de/tag/3d-drucker/

There are also other 3D models and DIY projects on this page.

You can also find current filament experience reports there

https://www.tueftler-und-heimwerker.de/artillery-sidewinder-x1-test-3d-drucker/#filament

Further tests also here https://www.thingiverse.com/tueftler-maker/collections/3d-drucker-test

More projects and tips and 3D model / drawing on

https://www.tueftler-und-heimwerker.de

PATREON - https://www.patreon.com/techtueftler

-