STL Warcry Definitive Warcry box. Definitive Warcry box. STL FILE

ENGLISH - SPANISH

If you play Warcry, you are going to love this.

Box designed to store and transport all the necessary elements for your Warcry games.

The box has a double-sided magnetic lid so when printing it on your 3D printer, you must pause the printing at the corresponding time to insert the 6x3mm magnets. Be very careful with magnets, respect their polarity so that the box and lid close properly.

On the bottom side, you have a dice roll organizer for two players. The lower part of the box is printed independently so that it can be lined with velvet.

The stl files are also provided to print the small nesting box for the tokens.

The original box were printed with a prusa MK3s. You need a 23x20 cm print area.

No supports needed.

Printed on Prusa MK3s

...

If you play Warcry, you're going to love this.

Box designed to store and transport all the items you need for your Warcry games.

The box has a double-sided magnetized lid so when printing it on your 3D printer, you must pause printing at the appropriate time to insert the 6x3mm magnets. Be very careful with the magnets, respect their polarity so that the box and the lid close properly.

On the bottom side, you have a dice roll organizer for two players. The bottom of the box is printed separately so that it can be lined with velvet.

The stl files for printing the small nestable box for the tokens are also provided.

The original Warcry box , was printed on a prusa MK3s 3D printer. You need a print area of at least 23x20cm.

No supports required.

Printed on Prusa mk3s

Normal quality 0.2

High quality 0.15